Soporte de pared de tijera Strobepro
$169.95 CAD
061900
Ahorro de espacio
El soporte de pared Scissor es perfecto para estudios permanentes con espacio limitado. Sin el tamaño de un soporte de iluminación, se acerca mucho más a la pared cuando es necesario y se abate fácilmente cuando no se necesita.
ENVÍO
Tenga en cuenta que este artículo se envía en una caja de gran tamaño, lo que genera cargos adicionales por parte de la empresa de transporte. No está incluido en ninguna promoción de envío gratuito. El envío por exceso de tamaño se calculará al finalizar la compra. No se preocupe, los artículos con envío gratuito en su carrito se enviarán gratis. Los cargos por exceso de tamaño no se aplican a la recogida en tienda.
Sólido como una roca
Una vez anclado a un montante o al hormigón, puedes cargarlo con confianza. No necesitas sacos de arena. Está construido con acero sólido. Este soporte es una bestia.
Ajustes de triple eje
Puedes mover el soporte de pared de tijera hacia arriba y hacia abajo, extenderlo hacia adelante y hacia atrás, y girarlo sobre el punto de pivote. También puedes ajustar el elevador del soporte de iluminación hacia arriba y hacia abajo.
Presupuesto
| Peso | 18,5 libras (8,4 kg) |
| Material | Acero |
| Altura total | 48" (121,92 cm) |
| Recorrido de columna arriba/abajo | 47,24" (120 cm) |
| Elevador de soporte de iluminación para viajes | 19,69"-31,5" (50-80 cm) |
| Distancia desde la pared almacenada | 3,5" (8,89 cm) |
| Extensión de tijera mínima con capacidad de carga | 50 libras (22,68 kg) |
| Extensión de tijera con capacidad de carga máxima | 20 libras (9,07 kg) |
| Alcance máximo de tijera | 60" (152,4 cm) |
| Soporte giratorio montado en la pared | 180 grados |
Incluye
-1 x Soporte de pared de tijera
-8 x Anclajes de hormigón
Customers praised this wall-mounted scissor stand as "well built" and versatile for studio lighting. It saves floor space and prevents knockovers. Installation requires concrete walls or studs, not drywall. Shoppers noted it holds heavy equipment with ease and offers adjustable height/direction. One customer called it an "absolute game changer."
- Mounting two of these has been an absolute game changer for versatility and strength.
- Quick and easy to install. The versatility of height and direction is quite useful.
- Well built, can hold a Profoto B1 head and modifier with ease.
Lighting (positive)Strength (positive)Space (positive)Versatility (positive)Studio (positive)
V
I recommend
Nice product
Good services
Thanks
Im a pet groomer , Ive buying this for my 27 pounds dryer , and , after Ive tried one , I automatically order 2 more !!
Thanks !
V
I recommend
Nice product
Good services
Thanks
Im a pet groomer , Ive buying this for my dryer , and , after Ive tried it , I automatically order 2 more !!
Thanks !
P
Quick and easy to install. The versatility of the height and direction adjustments is quite useful. Quite easy to move lightboxes out of the way when not in use. Would definitely recommend.
A
Unit is well built, can hold a Profoto B1 head and modifier with ease.
A
good communication, timely delivery, solid product! (only wish I could have found one made in north america!)
E
We purchased this item a few weeks back and cannot be happier. It is really easy to install and we have found quit a few uses for it in our studio!
M
This is really well built, and heavy which is what makes the installation a bit challenging or a fun project depending on the mood. You will most likely have to take it apart to install it. I had to install it on a concrete wall, don't try to set it on drywall, you will need at least anchor it on a 2x4.
00) equipment: a SDS Drill will make your life easier, regular ones might cause pain in the wrist, make sure to take lots of breaks. You will need a 15/32 drill bit. The hole has to be at least 1/4" longer than the anchor (this is a must, i made that mistake so you don't have too). I used a wrench with a 14mm cube to tight the nuts.
01) As my dad used to say, measure twice and then measure again before cutting (drilling in this case). I used on of the sides of the box where it came from to create a template of wall stand. I marked the plates and the holes. Cut the rectangle and then use a level to place it on the wall and make sure it's leveled (tape it to the wall once it levelled). I then used the drill to mark the holes. I removed the template, and placed the wall stant on the marked holes to make sure I did it right.
02) Hole Drilling. Here is where things will start go south as you will not be 100% perpendicular to the wall throughout the whole drilling process, but do your best. Then you MUST clean the hole (use a vacume or compressed air). Drill one hole at the time and test that each anchor goes in in a closed position. remove the anchor that you used to test the whole. I suggest drilling the top two holes first and then making your way down.
03) If you drilled the hole properly you will only need to tap it with the hammer, if you drilled the hole incorrectly you will be tempted to pound it with the hammer, don't do it, you will mess up the thread and then you messed up to the point of no return for that hole. do place the second anchor. and now test it wall stand, you should be able now to bolt it to the wall. Now repeat the process for all the other holes, starting with the top holes of the lower anchor plate.
04) Assemble the wall mount: at this point you can assemble back the wall mount in place securing the top nut that attaches to the top plate.
Good luck
R
I have a small space in which I photograph dogs and cats in. Light stands sitting on the ground get in the way and take up valuable floor space and have the potential to be knocked over by an exuberant dog. Mounting two of these in my studio has been an absolute game changer. They are so versatile for almost all of my lighting setups including overhead lighting. Everytime I set up my lighting I'm even more impressed with their versatility and strength. I'm already saving up for another pair. Awesome product!
T
These were just what I needed, Thanks!
J
This works great! I have a small space at my home I sometimes use as a studio and this wall mounted stand works wonderfully
C
Can this be mounted to the roof also or just a vertical wall? I see something that looks like this in the background stand video.
You could mount it to the roof but it is designed for wall. What you saw in the video was a roof mount truss system that is quite extensive for a home studio and requires at least 10 foot ceilings.<br/>Thanks
J
Can this be mounted on the ceiling?
No, as it would have no resistance to push the scissor back up.
P
What are the dimensions of the stand? How far does it reach on full scissor extension? Maximum safe weight?
All the specs are in the description now. Max reach is 5 feet. Load bearing is 50- 20 pounds.