Actualización de firmware

ADVERTENCIA

La actualización de firmware es para usuarios avanzados. Si fallas, tu dispositivo se bloqueará y no estará cubierto por la garantía. También actualizamos el firmware gratis en el almacén de Calgary.

Utilice únicamente el instalador Godox G3 V1.1 para Mac y Windows. Usar versiones anteriores para productos nuevos como Godox X3, AD200 ProII y AD600 Pro II podría dañar su dispositivo.

STROBEPRO y GODOX

Strobepro es el mayor distribuidor de productos Godox en Canadá. Al comprar flashes y controladores Strobepro, puede estar seguro de la sólida garantía canadiense gratuita de 2 años de Strobepro. Esta incluye soporte técnico completo. El firmware de Strobepro y Godox es totalmente compatible. No se deje engañar por impostores.

REQUISITOS

La actualización de firmware requiere una PC o Mac. Tenga en cuenta que G3 Software es compatible con Mac, pero solo con algunos productos. Use la PC para obtener compatibilidad completa. También necesitará un cable micro USB o un cable USB-C para los productos más nuevos.

Lea esto primero.

Procedimiento de instalación del software G1

Actualización del firmware del G1
Modelo	Versión	Fecha de lanzamiento	Observación	Descargar	Contenido actualizado
Estroboscópico Godox G1	Versión 0.4	22/07/2019	Software de actualización de firmware para Strobepro Godox G1		Software de actualización de firmware del Godox G1
V860C	Versión 2.2	11/05/2015	V860 para cámara Canon
V860N	Versión 2.3	14/06/2016	V860 para cámara Nikon
Batería de litio X60C (V860IIC)	Versión 1.8	26/04/2019	V860II para cámara Canon		1. Para resolver el problema de compatibilidad de los nuevos modelos de cámaras, por ejemplo, 1500D, 3000D, etc.
Batería de litio X60N (V860IIN)	Versión 1.9	09/06/2020	V860II para cámara Nikon		1. Para resolver el problema de compatibilidad de la nueva cámara D780.
X60S LITIO (V860IIS)	Versión 1.7	24/10/2018	V860II para cámara Sony		1. Compatible con el sistema PENTAX X
Batería de litio X60F (V860IIF)	Versión 1.2	24/10/2018	V860II para cámara FUJIFILM		1. Compatible con el sistema PENTAX X
X60OP LITIO (V860IIO)	Versión 1.4	24/10/2018	V860II para cámara Olympus/Panasonic		1. Compatible con el sistema PENTAX X
X60C (TT685C)	Versión 3.4	07/05/2019	TT685 para cámara Canon		1. Para resolver los problemas de compatibilidad de las nuevas cámaras EOS R, 1500D (2000D/Rebel T7) y 3000D (4000D). 2. Para ser compatible con el sistema inalámbrico Godox Pentax X
X60N (TT685N)	V3.3	18/12/2020	TT685 para cámara Nikon		1. Compatible con el acuerdo de zapata de la cámara D780.
X60S (TT685S)	Versión 2.1	01/12/2017	TT685 para cámara Sony		1. Para agregar la opción de ID inalámbrica (C.Fn-ID) 2. Para agregar la opción ENCENDIDO/APAGADO del indicador de modo ESCLAVO (LED C.Fn-Sv) 3. Agregar la función que permite que el flash se dispare presionando el botón TEST cuando está conectado a la cámara.
X60F (TT685F)	Versión 1.1	01/12/2017	TT685 para cámara FUJIFILM		1. Para agregar la opción de ID inalámbrica (C.Fn-ID) 2. Para agregar la opción ENCENDIDO/APAGADO del indicador de modo ESCLAVO (LED C.Fn-Sv)
X60OP (TT685O)	Versión 1.2	01/12/2017	TT685 para cámara Olympus/Panasonic		1. Para agregar la opción de ID inalámbrica (C.Fn-ID) 2. Para agregar la opción ENCENDIDO/APAGADO del indicador de modo ESCLAVO (LED C.Fn-Sv)
X1T-C (XTC)	V27	18/06/2019	Transmisor X1 para Canon		1. Para agregar la compatibilidad con Canon EOS 200DII (Rebel SL3/Kiss X10) 2. Para agregar el soporte de la cámara Canon EOS RP 3. Para resolver el problema de compatibilidad de la cámara Canon EOS R
X1T-N (XTN)	V25	22/12/2020	Transmisor X1 para Nikon		Para solucionar el problema de sobreexposición al colocar el flash de la cámara en la cámara Z6/Z7.
X1T-S (XTS)	V19	10/11/2023	Transmisor X1 para Sony		C.FN-10 AF-OPT (AF Assist Focus) establece el valor predeterminado para cámaras sin espejo (00: cámara de lentes intercambiables sin espejo (MILC); 01: cámara réflex digital de lente única (DSLR))
X360C (AD360II-C)	Versión 2.8	07/12/2017	AD360II para Canon		1. Para agregar la opción de ID inalámbrica (C.Fn-ID) 2. Para agregar la opción ENCENDIDO/APAGADO del indicador de modo ESCLAVO (C.Fn-SvLED) 3. Para restaurar la función de sincronización de la segunda cortina
360N (AD360II-N)	Versión 2.7	07/12/2017	AD360II para Nikon		1. Para agregar la opción de ID inalámbrica (C.Fn-ID) 2. Para agregar la opción ENCENDIDO/APAGADO del indicador de modo ESCLAVO (C.Fn-SvLED)
X600II TTL (AD600)	Versión 2.6	31/08/2018	AD600/AD600B TTL		1. Compatible con el sistema inalámbrico Godox PENTAX X
MANUAL DEL X600II (AD600M	Versión 1.9	31/08/2018	Manual del AD600M/AD600BM		1. Compatible con el sistema inalámbrico Godox PENTAX X

Procedimiento de instalación del software G2

Actualización del firmware del G2
Modelo	Versión	Fecha de lanzamiento	Observación	Descargar	Contenido actualizado
Godox G2	Versión 0.1	12/06/2017	Software de actualización de firmware del Godox G2		Software de actualización de firmware del Godox G2
AD600Pro (X600PRO)	Versión 1.8	15/08/2023	Flash para exteriores todo en uno AD600Pro		Para agregar GRUPO al menú, con los Grupos de Receptores Controlables aumentados a 16
Año 200 d. C. (X200)	Versión 2.5	19/08/2022	Flash de bolsillo AD200		Para agregar compatibilidad con el disparador de flash para Leica --- Sistema inalámbrico XProIIL
X1T-F (XT-F)	V07	09/11/2020	Transmisor X1 para FUJIFILM		1.Optimizar la comunicación de las mismas cámaras.
X1T-O (XT-OP)	V06	22/10/2019	Transmisor X1 para Olympus/Panasonic		1. Para resolver el problema de disparo discontinuo en disparo continuo al utilizar cámaras Panasonic, por ejemplo, S1R.
TT350C (X35-C)	Versión 1.7	06/05/2019	TT350 para cámara Canon		1. Para resolver los problemas de compatibilidad de las nuevas cámaras, por ejemplo, EOS R, 1500D y 3000D.
TT350N (X35-N)	Versión 1.3	15/08/2018	TT350 para cámara Nikon		Para agregar ID inalámbrico en el menú C.Fn, aumentando así la no interferencia de la transmisión inalámbrica
TT350S (X35-S)	Versión 1.8	15/08/2018	TT350 para cámara Sony		Para agregar ID inalámbrico en el menú C.Fn, aumentando así la no interferencia de la transmisión inalámbrica
TT350F (X35-F)	Versión 1.2	15/08/2018	TT350 para cámara FUJIFILM		Para agregar una identificación inalámbrica en el menú C.Fn, aumentando así la no interferencia de la transmisión inalámbrica
TT350O (X35-OP)	Versión 1.2	15/08/2018	TT350 para cámara Olympus/Panasonic		Para agregar ID inalámbrico en el menú C.Fn, aumentando así la no interferencia de la transmisión inalámbrica
V350C (X35L-C)	Versión 1.1	06/05/2019	V350 para cámara Canon		1. Para resolver los problemas de compatibilidad de las nuevas cámaras EOS R, 1500D y 3000D
V350N (X35L-N)	Versión 1.0	17/06/2021	V350 para cámara Nikon		1. Compatibilidad optimizada con las cámaras D780, Z6 y Z7.
V350S (X35L-S)	Versión 1.0	06/10/2018	V350 para cámara Sony		1.La versión original
V350F (X35L-F	Versión 1.0	06/10/2018	V350 para cámara FUJIFILM		1.La versión original
V350O (X35L-OP)	Versión 1.0	06/10/2018	V350 para cámara Olympus/Panasonic		1.La versión original
XproC (XTPRO-C)	Versión 2.0	30/12/2020	Xpro para cámara Canon		1. Compatible con Canon EOS 200DII (Rebel SL3/Kiss X10)
XproN (XTPRO-N)	Versión 1.7	09/11/2020	Xpro para cámara Nikon		1. Para agregar la forma de visualización decimal del valor de potencia
XproS (XTPRO-S)	Versión 1.3	09/11/2020	Xpro para cámara Sony		1. Para agregar la forma de visualización decimal del valor de potencia
XproF (XTPRO-F)	Versión 1.3	09/11/2020	Xpro para cámara FUJIFILM		1. Para agregar la forma de visualización decimal del valor de potencia
XproO (XTPRO-OP)	Versión 1.3	09/11/2020	Xpro para cámaras Olympus/Panasonic		1. Para agregar la forma de visualización decimal del valor de potencia
A1	Versión 2.4	27/07/2018	A1		Para agregar el valor ISO de la versión de Android

Firmware G3

Actualización del firmware del G3
Modelo	Versión	Fecha de lanzamiento	Observación	Descargar	Contenido actualizado
Godox G3	macOS	29/07/2024	Software de actualización de firmware Godox G3 V1.1 para Mac		Al usar un puerto USB-C para conectar el dispositivo, se requiere un concentrador para conectar el cable de datos USB. Al usar un puerto USB-A, el cable de datos USB se puede conectar directamente.
Godox G3	Ventanas	29/07/2024	Software de actualización de firmware Godox G3 V1.1 para PC		Software de actualización de firmware del Godox G3 (Windows)
AD100Pro	Versión 1.2	19/08/2022			Para agregar compatibilidad con Flash Trigger para el sistema inalámbrico XProII
AD200Pro	Versión 1.6	27/05/2024	Asegúrese de que la luz NO ESTÉ MARCADA como "Versión A"		Para agregar compatibilidad con el cabezal de luz de pestañas AD-S200.
AD200Pro A	Versión 1.6	27/05/2024	Solo para luces MARCADAS con "Versión A"		Para agregar compatibilidad con el cabezal de luz de pestañas AD-S200.
AD200ProII	Versión 1.03	27/09/2024			1. Actualice el firmware con el software de actualización de firmware Godox G3 V1.1. Puede descargarlo desde el sitio web oficial.
AD300Pro	Versión 1.2	19/08/2022			Para agregar compatibilidad con Flash Trigger para el sistema inalámbrico XProII
AD400Pro (AD400Pro)	Versión 1.4	15/08/2023	Flash para exteriores todo en uno AD400Pro		Para agregar GRUPO al menú, con los Grupos de Receptores Controlables aumentados a 16
AD600Pro II	V1.06	22/08/2024	AD600ProII		Se optimizó la función TTL
AD1200Pro	Versión 1.2	19/08/2022	Paquete de alimentación TTL de 1200 W		Para agregar compatibilidad con Flash Trigger para el sistema inalámbrico XProII
V1C	Versión 1.9	19/08/2022	V1 para cámara Canon		Para agregar compatibilidad con Flash Trigger para el sistema inalámbrico XProII
V1N	Versión 1.6	19/08/2022	V1 para cámara Nikon		Para agregar compatibilidad con Flash Trigger para el sistema inalámbrico XProII
V1S	Versión 1.8	19/08/2022	V1 para cámara Sony		Para agregar compatibilidad con Flash Trigger para el sistema inalámbrico XProII
V1F	Versión 1.3	19/08/2022	V1 para cámara Fujifilm		Para agregar compatibilidad con Flash Trigger para el sistema inalámbrico XProII
V1O	Versión 1.3	19/08/2022	V1 para cámara Olympus/Panasonic		Para agregar compatibilidad con Flash Trigger para el sistema inalámbrico XProII
V1P	Versión 1.2	19/08/2022	V1 para cámara Pentax		Para agregar compatibilidad con Flash Trigger para el sistema inalámbrico XProII
V860IIIC	Versión 1.3	19/08/2022			Para agregar compatibilidad con Flash Trigger para el sistema inalámbrico XProII
V860IIIN	Versión 1.1	19/08/2022			Para agregar compatibilidad con Flash Trigger para el sistema inalámbrico XProII
V860IIIS	Versión 1.1	19/08/2022			Para agregar compatibilidad con Flash Trigger para el sistema inalámbrico XProII
V860IIIF	Versión 1.1	19/08/2022			Para agregar compatibilidad con Flash Trigger para el sistema inalámbrico XProII
V860IIIO	Versión 1.1	19/08/2022	Olympus/Panasonic		Para agregar compatibilidad con Flash Trigger para el sistema inalámbrico XProII
TT350P (X35P)	Versión 1.2	06/06/2019	TT350 para cámara Pentax		1. Para solucionar el problema de que a veces XPro no puede activarse presionando su botón TEST en modo TTL inalámbrico.
X1R-C	V26	05/06/2024	Receptor X1 para Canon		Se corrigieron algunos problemas menores.
X1R-N	V22	05/06/2024	Receptor X1 para Nikon		Se solucionó el problema por el cual podía ocurrir un comportamiento de flash anormal en el receptor al activar el flash de alta velocidad después de presionar el botón TEST. Se resolvió el problema de la activación irregular de la luz de fondo en la pantalla del flash montado en la zapata superior del receptor.
X1R-S	V05	10/01/2018	Receptor X1 para Sony		1. El cliente puede configurar el ID de RF. Operación: Presione los botones CH y GR simultáneamente y enciéndalo para acceder a la interfaz de configuración del ID de RF. Presione brevemente o mantenga presionado el botón CH para agregar el valor del ID, o presione brevemente o mantenga presionado el botón GR para disminuirlo. Apague el flash después de 5 segundos para configurar y guardar el valor del ID. Luego, enciéndalo; el valor del ID afectará la recepción de RF.
XPRO-P	Versión 1.3	0 de noviembre de 2020	Xpro para cámaras Olympus/Panasonic		Para agregar la forma de visualización decimal del valor de potencia
X3-C	Versión 1.25	06/09/2024	Actualice el firmware con el software de actualización de firmware Godox G3 Windows V1.1 o Godox G3 MacOS V1.1.		Para optimizar la conectividad de la cámara.
X3-N	Versión 1.15	06/09/2024	Actualice el firmware con el software de actualización de firmware Godox G3 Windows V1.1 o Godox G3 MacOS V1.1.		Para optimizar la conectividad de la cámara.
X3-S	Versión 1.15	06/09/2024	Actualice el firmware con el software de actualización de firmware Godox G3 Windows V1.1 o Godox G3 MacOS V1.1.		Para optimizar la conectividad de la cámara.
X3-F	Versión 1.11	06/09/2024	Actualice el firmware con el software de actualización de firmware Godox G3 Windows V1.1 o Godox G3 MacOS V1.1.		Para optimizar la conectividad de la cámara.
X3-O	Versión 1.02	06/09/2024	Actualice el firmware con el software de actualización de firmware Godox G3 Windows V1.1 o Godox G3 MacOS V1.1.		Para optimizar la conectividad de la cámara.
X3-L	Versión 1.02	06/09/2024	Actualice el firmware con el software de actualización de firmware Godox G3 Windows V1.1 o Godox G3 MacOS V1.1.		Para optimizar la conectividad de la cámara.
X2TC	Versión 1.4	02/08/2022	Transmisor X2 para Canon		1. Para que coincida con la actualización de la aplicación flash Godox.
Versión Z01 de X2TC	Versión 1.4	02/08/2022	Esta versión es compatible con X2T-C Trigger, que tiene una marca Z01 en la carcasa exterior (cerca del puerto USB o en la tapa de la batería) o tiene una pegatina que marca Z01 cerca del puerto USB.		1. Para que coincida con la actualización de la aplicación flash Godox.
X2TN	Versión 1.2	02/08/2022	Transmisor X2 para Nikon		1. Para que coincida con la actualización de la aplicación flash Godox.
X2TN Versión Z01	Versión 1.2	02/08/2022	Esta versión es compatible con el disparador X2T-N, que tiene una marca Z01 en la carcasa exterior (cerca del puerto USB o en la tapa de la batería) o tiene una pegatina que marca Z01 cerca del puerto USB.		1. Para que coincida con la actualización de la aplicación flash Godox.
X2TS	Versión 1.4	02/08/2022	Transmisor X2 para Sony		1. Para que coincida con la actualización de la aplicación flash Godox.
X2TS Versión Z01	Versión 1.4	02/08/2022	Esta versión es compatible con el disparador X2T-S, que tiene una marca Z01 en la carcasa exterior (cerca del puerto USB o en la tapa de la batería) o tiene una pegatina que marca Z01 cerca del puerto USB.		1. Para que coincida con la actualización de la aplicación flash Godox.
X2TF	Versión 1.4	02/08/2022	Transmisor X2 para Fujifilm		1. Para agregar compatibilidad de las cámaras X-S10, GFX100S y X-H2S.
X2TO	Versión 1.3	02/08/2022	Transmisor X2 para Olympus/Panasonic		1. Para que coincida con la actualización de la aplicación flash Godox.
X2TP	Versión 1.3	02/08/2022	Transmisor X2 para Pentax		1. Para resolver el problema de que el valor CH no se puede configurar después de la actualización del firmware V1.2.
XproP (XTPRO-P)	Versión 1.2	Xpro para cámara Pentax	Xpro para cámara Pentax		1. Para agregar la forma de visualización decimal del valor de potencia.
UHF WMicS1_TX	V2.00_20	05/08/2021	Firmware para el transmisor UHF WMicS1		1. Optimizar la selección de frecuencia del cristal
UHF WMicS1_RX	V2.00_20	05/08/2021	Firmware para el receptor UHF WMicS1		1. Optimizar la selección de frecuencia del cristal
XPROII-C	Versión 1.4	2023/0719	XPROII-C para cámaras Canon		Se solucionó el problema de visualización incorrecta y la imposibilidad de cambiar de grupo en la interfaz de configuración de grupo único.
XPROII-N	Versión 1.5	12/08/2024	XPROII-N para cámaras Nikon		Se solucionó el problema por el cual las cámaras Z9 y Z6III no podían activar el flash correctamente.
XPROII-S	Versión 1.3	2023/0719	XPROII-S para cámaras Sony		Se solucionó el problema de visualización incorrecta y la imposibilidad de cambiar de grupo en la interfaz de configuración de grupo único.
XPROII-F	Versión 1.4	2023/0719	XPROII-F para cámaras Fuji		Se solucionó el problema de visualización incorrecta y la imposibilidad de cambiar de grupo en la interfaz de configuración de grupo único.
XPROII-O	Versión 1.4	2023/0719	XPROII-OP para cámaras Olympus/Panasonic		Se solucionó el problema de visualización incorrecta y la imposibilidad de cambiar de grupo en la interfaz de configuración de grupo único.
XPROII-L	Versión 1.4	2023/0719	XPROII-L para cámaras Leica		Se solucionó el problema de visualización incorrecta y la imposibilidad de cambiar de grupo en la interfaz de configuración de grupo único.

Actualización del firmware de la luz LED
Modelo	Versión	Fecha de lanzamiento	Observación	Descargar	Contenido actualizado
SZ150R	Versión 1.2	13/03/2021	Luz LED		1. Actualizar la función de regulación de GM
LD75R	V1.03	13/03/2021	Luz LED		1.Se optimizó el problema de que el cambio entre modos no es lo suficientemente natural.
LD150R	Versión 1.02	13/03/2021	Luz LED		1.Se optimizó el problema de que el cambio entre modos no es lo suficientemente natural.
LD150RS	Versión 1.02	13/03/2021	Luz LED		1.Se optimizó el problema de que el cambio entre modos no es lo suficientemente natural.
F200Bi	V1.03	28/11/2023	Utilice una unidad flash USB para copiar el firmware al directorio raíz. El disco duro debe estar en formato FAT32. Solo puede haber un firmware en el directorio raíz.		Soluciona el problema de salida inestable en ciertos niveles de brillo.
F400Bi	Versión 1.02	28/11/2023	Utilice una unidad flash USB para copiar el firmware al directorio raíz. El disco duro debe estar en formato FAT32. Solo puede haber un firmware en el directorio raíz.		Soluciona el problema de salida inestable en ciertos niveles de brillo.
F600Bi	Versión 1.05	28/11/2023	Utilice una unidad flash USB para copiar el firmware al directorio raíz. El disco duro debe estar en formato FAT32. Solo puede haber un firmware en el directorio raíz.		Soluciona el problema de salida inestable en ciertos niveles de brillo.
M600Bi	Versión 1.1	08/04/2023	Descargue el firmware más reciente (archivo Bin) del M600Bi y guárdelo en el directorio principal de la memoria USB. Luego, conecte la memoria USB a la interfaz USB de la caja de control del M600Bi.		1.El puerto USB puede proporcionar un voltaje de 5 V y una corriente de 500 mA. 2. Al presionar brevemente el botón de apagado, la luz se puede encender y apagar rápidamente. 3.DMX se modifica a 6 modos

Read This Before You Update

A failed update can brick your device. Firmware updates are for confident users. Damage from a failed or interrupted update isn’t covered under warranty.

Match the exact model and camera version. Use only the file for your exact model and camera letter (for example, X3-C for Canon and X3-N for Nikon). Some models have hardware versions that need a different file, such as the X2T “Z01” units and the AD200Pro “Version A” units. Check the label on your device first.

Charge fully first. Godox says not to update when the battery is low. Use a fresh or fully charged battery, or mains power if the light has it.

Don’t disconnect. Keep the USB cable, USB drive or SD card in place, and don’t switch the device off until the software says the update is finished.

Use the right software version. Most current gear needs Godox G3 (V2.0 is the current version on Godox’s site). Older gear uses the G1 or G2 launcher. Each card tells you which one.

Not sure? We’ll do it free. Bring it in or drop it off at our Calgary warehouse and we’ll update it free, usually as soon as it comes in.

Step 1: Get the Update Software

Most current Godox flashes, triggers and receivers use Godox G3: V2.0 for Windows supports Windows 10 and Windows 11, and V2.0 for macOS supports macOS Catalina (10.15) to macOS Sequoia (15). Older gear uses the G1 or G2 launcher. Each firmware card below shows which one you need.

Mac tip from Godox: if G3 doesn’t show “Device connected successfully” and you’re using a USB-C port, connect the USB cable through a hub. A USB-A port can connect directly.

Godox G1 Launcher

V0.4

Released: Jul 22, 2019

Godox G1 firmware update software.

For: V860IIC, V860IIN, V860IIS, V860IIF, V860IIO, TT685C, TT685N, TT685S, TT685F, TT685O, X1T-C, X1R-C, X1T-N, X1R-N, X1T-S, X1R-S, AD360II-C, AD360II-N, AD600, AD600M.

Download V0.49.2 MB

Godox G2 Launcher

V0.1

Released: Jun 12, 2017

Godox G2 firmware update software.

For: AD600Pro, AD200, X1T-F, X1T-O, TT350C, TT350N, TT350S, TT350F, TT350O, V350C, V350N, V350S, V350F, V350O, Xpro-C, Xpro-N, Xpro-S, Xpro-F, Xpro-O.

Download V0.15.1 MB

Godox G3 V2.0 for macOS

V2.0

Released: Jul 25, 2025

The macOS version supports macOS Catalina (10.15) to macOS Sequoia (15).

If G3 doesn't show "Device connected successfully" when you connect by USB: on a USB-C port, connect the USB cable through a hub. On a USB-A port, you can connect the cable directly.

Download V2.022.4 MB

Godox G3 V2.0 for Windows

V2.0

Released: Nov 17, 2025

The Windows version supports Windows 10 and Windows 11.

Godox G3 firmware update software.

Download V2.026.3 MB

How to Update Godox Firmware

Updating with Godox G3 (most current gear)

Download and install Godox G3 for Windows or macOS from the Update Software section above.
Check your current version. On most newer models, open the menu and go to Device Info at the end. The version is shown as V1.00, for example. Find your model in the list and compare.
Fully charge the battery.
Download your model’s file from this page. Unzip it if it’s a .zip, and use the .rar tool of your choice for .rar files.
Connect the device to your computer with a USB data cable, using the method in your model’s notes. Some models need you to power on and choose Firmware Upgrade in the menu. Others need you to hold a button (such as SET or MENU) while you plug in the cable.
Open the firmware file in G3, start the update, and wait. Don’t unplug or switch off until G3 says it’s finished.
Check the version again in the menu to confirm.

Updating with Godox G1 or G2 (older gear)

Install the G1 or G2 Launcher, as listed on your model’s card.
Fully charge the battery, then connect the device by USB.
Open the firmware file with the launcher and run the update. Don’t disconnect until it’s done.

Updating LED lights with a USB drive

Format a USB flash drive as FAT32.
Copy the firmware (.bin) file to the root of the drive. Godox says only one firmware file should be on the drive.
Insert the drive into the light’s USB port and follow your model’s notes. For example, some models need you to hold MODE while powering on. Wait for the progress bar to finish.

Updating Godox monitors with an SD card

Unzip the firmware to the root of an SD card.
Insert the card into the monitor and follow the steps in your model’s notes. Godox lists the version check as Menu → Setting → Upgrade.

Latest Godox Firmware Releases

All Godox Firmware by Model

AD100Pro Firmware

V1.2

Released: Aug 19, 2022
Type: Flash
Camera: Not camera-specific
Update with: Godox G3

Download V1.2

Important Release Notes

What’s new

Added compatibility with the Godox XPro II L wireless flash trigger for Leica.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

AD1200Pro Firmware

V1.2

Released: Aug 19, 2022
Type: Flash
Camera: Not camera-specific
Update with: Godox G3

Download V1.2Shop the AD1200Pro

Important Release Notes

What’s new

Added compatibility with the Godox XPro II L wireless flash trigger for Leica.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

AD200 Firmware

v2.6

Released: Nov 18, 2025
Type: Flash
Camera: Not camera-specific
Update with: Godox G2

Download v2.6

Important Release Notes

What’s new

Compatible with the new batch of AD-S200 flash heads.

How to update

Update with Godox G2 (see the Update Software section of this page).
To check the version: press MODE to turn the unit on. The LED screen shows U-xx, where xx is the version number.

AD200Pro Firmware

V1.6

Released: May 27, 2024
Type: Flash
Camera: Not camera-specific
Update with: Godox G3

Check first: Check whether your unit has a "Version A" sticker, then choose the matching firmware.

Download V1.6

Important Release Notes

What’s new

Added compatibility with the AD-S200 flash head.
Check whether your unit has a "Version A" sticker, then choose the matching firmware.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

AD200Pro(for Version A) Firmware

V1.6

Released: May 27, 2024
Type: Flash
Camera: Not camera-specific
Update with: Godox G3

Check first: Check whether your unit has a "Version A" sticker, then choose the matching firmware. This file is for Version A units.

Download V1.6

Important Release Notes

What’s new

Added compatibility with the AD-S200 flash head.
Check whether your unit has a "Version A" sticker, then choose the matching firmware.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

AD200ProII Firmware

V1.05

Released: Mar 11, 2025
Type: Flash
Camera: Not camera-specific
Update with: Godox G3

Download V1.05Shop the AD200ProII

Important Release Notes

What’s new

Improved compatibility between the external USB433 module (FR433) and FT-16 transmitters.
Fixed a fault when using the FT433N transmitter with the FR433 module for high-speed sync on channel CH1.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, go to the Settings screen and open Device Info at the end. The version is shown as, for example, V1.00 (version 1.00).

AD300Pro Firmware

V1.3

Released: Mar 14, 2025
Type: Flash
Camera: Not camera-specific
Update with: Godox G3

Download V1.3

Important Release Notes

What’s new

Compatible with the new batch of flash tubes.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

AD300ProII Firmware

V1.05

Released: Dec 22, 2025
Type: Flash
Camera: Not camera-specific
Update with: Godox G3

Download V1.05Shop the AD300ProII

Important Release Notes

What’s new

Updated the Mask function: the cycle count is now up to 8, allowing multiple flashes.
Fixed an issue where the power level could shift in colour temperature mode with some transmitters.
Fixed garbled text when lowering power with quick adjustment after wireless groups were turned off.

How to update

Update with Godox G3 for Windows V1.1 or Godox G3 for macOS V1.1 (both in the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

AD360II-C Firmware

V2.8

Released: Dec 7, 2017
Type: Flash
Camera: Canon
Update with: Godox G1

Download V2.8

Important Release Notes

What’s new

Added a wireless ID option (C.Fn-ID).
Added an on/off option for the slave mode indicator (C.Fn-SvLED).
Restored second-curtain sync.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

AD360II-N Firmware

V2.7

Released: Dec 7, 2017
Type: Flash
Camera: Nikon
Update with: Godox G1

Download V2.7

Important Release Notes

What’s new

Added a wireless ID option (C.Fn-ID).
Added an on/off option for the slave mode indicator (C.Fn-SvLED).

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

AD400Pro Firmware

V1.5

Released: Mar 14, 2025
Type: Flash
Camera: Not camera-specific
Update with: Godox G3

Download V1.5

Important Release Notes

What’s new

Compatible with the new batch of flash tubes.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

AD400ProII Firmware

V1.21

Released: Apr 28, 2026
Type: Flash
Camera: Not camera-specific
Update with: Godox G3

Download V1.21Shop the AD400ProII

Important Release Notes

What’s new

Fixed a high-speed fault when using the Mask function.

How to update

Update with Godox G3 for Windows V1.1 or Godox G3 for macOS V1.1 (both in the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

AD600/AD600B Firmware

V2.6

Released: Aug 31, 2018
Type: Flash
Camera: Not camera-specific
Update with: Godox G1

Download V2.6

Important Release Notes

What’s new

Compatible with the Godox X wireless system for Canon, Nikon, Sony, Fujifilm, Olympus, Panasonic and Pentax.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

AD600BMII Firmware

V1.02

Released: Mar 5, 2025
Type: Flash
Camera: Not camera-specific
Update with: Godox G3

Download V1.02Shop the AD600BMII

Important Release Notes

What’s new

Added 433 MHz triggering.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

AD600M/AD600BM Firmware

V1.9

Released: Aug 31, 2018
Type: Flash
Camera: Not camera-specific
Update with: Godox G1

Download V1.9

Important Release Notes

What’s new

Compatible with the Godox X wireless system for Canon, Nikon, Sony, Fujifilm, Olympus, Panasonic and Pentax.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

AD600Pro Firmware

V1.9

Released: Mar 14, 2025
Type: Flash
Camera: Not camera-specific
Update with: Godox G2

Download V1.9

Important Release Notes

What’s new

Compatible with the new batch of flash tubes.

How to update

Update with Godox G2 (see the Update Software section of this page).
To check the version: turn the unit on and press MENU to open the C.Fn menu. The version (Ver x.x) is shown in the top right corner of the screen.

AD600ProII Firmware

V1.13

Released: Sep 15, 2026
Type: Flash
Camera: Not camera-specific
Update with: Godox G3

Download V1.13Shop the AD600ProII

Important Release Notes

What’s new

Improved high-speed sync performance and updated the Mask function.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

AI2C Driver

Windows

Released: Jan 30, 2023
Type: Audio
Camera: Not camera-specific
Update with: See Godox notes

Download Windows

Important Release Notes

How to update

Software driver for the AI2C 2-channel audio interface.

C100 Firmware

V1.1.6

Released: Oct 8, 2026
Type: Camera / printer
Camera: Not camera-specific
Update with: See Godox notes

Download V1.1.6

Important Release Notes

What’s new

Improved performance when reading C100 photos on mobile devices.

How to update

For detailed update steps, download the firmware documentation.

FL-D200 Firmware

V1.11

Released: May 26, 2026
Type: LED light
Camera: Not camera-specific
Update with: USB drive

Download V1.11

Important Release Notes

What’s new

Adjusted the GM zero point in Special Effects mode.

How to update

Format a USB flash drive as FAT32 and copy the firmware (.bin) file to its root folder. Only one firmware file can be on the drive.
Plug the drive into the light's USB port, then turn the light on. Wait for the update progress bar to finish.

GM55 Firmware

GM553_V0.0.10

Released: Aug 7, 2026
Type: Monitor
Camera: Not camera-specific
Update with: SD card

Download GM553_V0.0.10

Important Release Notes

What’s new

Improved how features work together for monitors on version GM553_V0.0.07.
Other versions don't need this update.

How to update

Download the monitor firmware from this page and unzip it to the root folder of an SD card.
Insert the SD card in the monitor, then go to Menu > Setting > Upgrade > Upgrade > Confirm. The update takes about 3 minutes.
To check the version: Menu > Setting > Upgrade.

GM6S Firmware

V1.2.59

Released: Oct 25, 2025
Type: Monitor
Camera: Not camera-specific
Update with: SD card

Download V1.2.59Shop the GM6S

Important Release Notes

What’s new

Added new features, such as anamorphic mode and masking sub-items.
Improved the user experience.

How to update

Download the monitor firmware from this page and unzip it to the root folder of an SD card.
Insert the SD card in the monitor, then go to Menu > Setting > Upgrade > Upgrade > Confirm. The update takes about 3 minutes.
To check the version: Menu > Setting > Upgrade.

GM6S Pro Firmware

V0.0.84

Released: Aug 7, 2026
Type: Monitor
Camera: Not camera-specific
Update with: SD card

Download V0.0.84

Important Release Notes

What’s new

Improved how features work together compared with the previous version.

How to update

Download the monitor firmware from this page and unzip it to the root folder of an SD card.
Insert the SD card in the monitor, then go to Menu > Setting > Upgrade > Upgrade > Confirm. The update takes about 3 minutes.
To check the version: Menu > Setting > Upgrade.

GM7S Firmware

B1.2.40

Released: Oct 25, 2025
Type: Monitor
Camera: Not camera-specific
Update with: SD card

Download B1.2.40

Important Release Notes

What’s new

Added new features, such as anamorphic mode and masking sub-items.
Improved the user experience.

How to update

Download the monitor firmware from this page and unzip it to the root folder of an SD card.
Insert the SD card in the monitor, then go to Menu > Setting > Upgrade > Upgrade > Confirm. The update takes about 3 minutes.
To check the version: Menu > Setting > Upgrade.

iT30Pro C Firmware

V1.02

Released: Feb 11, 2026
Type: Flash
Camera: Canon
Update with: Godox G3

Download V1.02Shop the iT30Pro C

Important Release Notes

What’s new

New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
Fixed high-speed sync compatibility with the Canon R1, R6 Mark III, R50 V and PowerShot V1.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Method 1: turn the device on, open the menu, go to Device Info, connect it to the computer by USB, then select Firmware Upgrade.
Method 2: with the device off, press and hold MENU, then connect it to the computer by USB and run the update.

iT30Pro F Firmware

V1.02

Released: Feb 11, 2026
Type: Flash
Camera: Fujifilm
Update with: Godox G3

Download V1.02Shop the iT30Pro F

Important Release Notes

What’s new

New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Method 1: turn the device on, open the menu, go to Device Info, connect it to the computer by USB, then select Firmware Upgrade.
Method 2: with the device off, press and hold MENU, then connect it to the computer by USB and run the update.

iT30Pro L Firmware

V1.01

Released: Oct 13, 2026
Type: Flash
Camera: Leica
Update with: Godox G3

Download V1.01

Important Release Notes

What’s new

Improved compatibility with the Leica M11.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Method 1: turn the device on, open the menu, go to Device Info, connect it to the computer by USB, then select Firmware Upgrade.
Method 2: with the device off, press and hold MENU, then connect it to the computer by USB and run the update.

iT30Pro N Firmware

V1.02

Released: Apr 10, 2026
Type: Flash
Camera: Nikon
Update with: Godox G3

Download V1.02Shop the iT30Pro N

Important Release Notes

What’s new

Fixed occasional misfiring when used with the Nikon Z8 and Z9.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Method 1: turn the device on, open the menu, go to Device Info, connect it to the computer by USB, then select Firmware Upgrade.
Method 2: with the device off, press and hold MENU, then connect it to the computer by USB and run the update.

iT30Pro O Firmware

V1.01

Released: Feb 11, 2026
Type: Flash
Camera: Olympus / Panasonic
Update with: Godox G3

Download V1.01Shop the iT30Pro O

Important Release Notes

What’s new

New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Method 1: turn the device on, open the menu, go to Device Info, connect it to the computer by USB, then select Firmware Upgrade.
Method 2: with the device off, press and hold MENU, then connect it to the computer by USB and run the update.

iT30Pro S Firmware

V1.07

Released: Feb 11, 2026
Type: Flash
Camera: Sony
Update with: Godox G3

Download V1.07Shop the iT30Pro S

Important Release Notes

What’s new

New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Method 1: turn the device on, open the menu, go to Device Info, connect it to the computer by USB, then select Firmware Upgrade.
Method 2: with the device off, press and hold MENU, then connect it to the computer by USB and run the update.

iT32 Firmware

V1.18

Released: Oct 13, 2026
Type: Flash
Camera: Not camera-specific
Update with: Godox G3

Check first: To update an X5: mount it on the iT32 while the iT32 is off, then press and hold the iT32's power button to turn it on. The X5 updates automatically if it isn't on the latest version. The X5L and X5Cm need iT32 firmware V1.16 or later to work properly.

Download V1.18Shop the iT32

Important Release Notes

What’s new

Fixed an issue where the X5C and X5Cm didn't trigger off-camera (slave) flashes when the camera was in Auto mode.
Improved compatibility with the Leica M11.

How to update

Use Godox G3 V1.1 or later to open this firmware file and run the update (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
iT32, method 1: with the iT32 off, press and hold SET, then connect it to the computer by USB and run the update.
iT32, method 2: turn the iT32 on, open the menu, go to Device Info, connect it to the computer by USB, then select Firmware Upgrade.
Don't update when the battery is low.
X5: mount the X5 on the iT32 while the iT32 is off, then press and hold the iT32's power button to turn it on. The X5 updates automatically if it isn't on the latest version.
The X5L and X5Cm need iT32 firmware V1.16 or later to work properly.

LA300Bi Firmware

V1.11

Released: Mar 4, 2025
Type: LED light
Camera: Not camera-specific
Update with: USB drive

Download V1.11Shop the LA300Bi

Important Release Notes

What’s new

Addressed known issues.

How to update

Format a USB flash drive as FAT32 and copy the firmware (.bin) file to its root folder. Only one firmware file can be on the drive.
Plug the drive into the light's USB port, then hold MODE while turning the light on to start the update. Wait for the update progress bar to finish.

LA300R/LA200R/LA150R Firmware

V1.11

Released: Mar 4, 2025
Type: LED light
Camera: Not camera-specific
Update with: USB drive

Download V1.11Shop the LA300R/LA200R/LA150R

Important Release Notes

What’s new

Addressed known issues.

How to update

Format a USB flash drive as FAT32 and copy the firmware (.bin) file to its root folder. Only one firmware file can be on the drive.
Plug the drive into the light, turn the light on and wait for the update to finish.
To check the version: open the menu and look under Info.

LA600Bi Firmware

V1.03

Released: May 10, 2025
Type: LED light
Camera: Not camera-specific
Update with: See Godox notes

Download V1.03Shop the LA600Bi

LA600R Firmware

V1.03

Released: May 10, 2025
Type: LED light
Camera: Not camera-specific
Update with: See Godox notes

Download V1.03

LD150R Firmware

V1.02

Released: Jul 12, 2021
Type: LED light
Camera: Not camera-specific
Update with: See Godox notes

Download V1.02

Important Release Notes

What’s new

Smoother switching between modes.

How to update

LED light.

LD150RS Firmware

V1.02

Released: Jul 12, 2021
Type: LED light
Camera: Not camera-specific
Update with: See Godox notes

Download V1.02

Important Release Notes

What’s new

Smoother switching between modes.

How to update

LED light.

LD75R Firmware

V1.03

Released: Jul 12, 2021
Type: LED light
Camera: Not camera-specific
Update with: See Godox notes

Download V1.03

Important Release Notes

What’s new

Smoother switching between modes.

How to update

LED light.

LE200Bi Firmware

V1.04

Released: May 14, 2026
Type: LED light
Camera: Not camera-specific
Update with: USB drive

Download V1.04

Important Release Notes

What’s new

Added a screen flip function.

How to update

Format a USB flash drive as FAT32 and copy the firmware (.bin) file to its root folder. Only one firmware file can be on the drive.
Plug the drive into the light's USB port, then hold MODE while turning the light on to start the update. Wait for the update progress bar to finish.

LE300Bi Firmware

V1.04

Released: May 14, 2026
Type: LED light
Camera: Not camera-specific
Update with: USB drive

Download V1.04Shop the LE300Bi

Important Release Notes

What’s new

Added a screen flip function.

How to update

Format a USB flash drive as FAT32 and copy the firmware (.bin) file to its root folder. Only one firmware file can be on the drive.
Plug the drive into the light's USB port, then hold MODE while turning the light on to start the update. Wait for the update progress bar to finish.

LE600Bi Firmware

V1.04

Released: May 14, 2026
Type: LED light
Camera: Not camera-specific
Update with: USB drive

Download V1.04Shop the LE600Bi

Important Release Notes

What’s new

Added a screen flip function.

How to update

Format a USB flash drive as FAT32 and copy the firmware (.bin) file to its root folder. Only one firmware file can be on the drive.
Plug the drive into the light's USB port, then hold MODE while turning the light on to start the update. Wait for the update progress bar to finish.

Lux Master Firmware

V1.02

Released: Aug 1, 2024
Type: Flash
Camera: Not camera-specific
Update with: Godox G3

Download V1.02

Important Release Notes

What’s new

Improved the touchscreen.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

P2400 Firmware

V2.7

Released: Jul 6, 2026
Type: Flash
Camera: Not camera-specific
Update with: Godox G3

Download V2.7

Important Release Notes

What’s new

Improved the optimal colour temperature mode.
Added 2.4G wireless sync to the menu. It copies the transmitter's channel and ID automatically, with no manual setup.
The default 2.4G channel is now 21, to match the transmitter's default channel.

How to update

Update with Godox G3 (see the Update Software section of this page).
To check the version: turn the light on and press MENU. The version is shown in the top right corner of the LCD (for example, V1.0 for version 1.0).
To set power and the modelling lamp on the P2400 by hand, without the transmitter (X3, X3 Pro or XPro II) overriding them, set the transmitter to L-858 mode.
X3 / X3 Pro: Setting > Shoot > L-858. XPro II: MENU > SHOOT > L-858.
Then press and turn the knob to adjust power in full-stop steps.

SKYTALK AIR Firmware

V1.15

Released: Jul 21, 2026
Type: Intercom
Camera: Not camera-specific
Update with: See Godox notes

Check first: Choose the firmware that matches your unit's language version. Don't mix versions.

Download V1.15

Important Release Notes

What’s new

Fixed excessive audio delay.
The spoken prompt for the microphone switch is now a short beep.
Raised the headset's maximum volume for clearer, louder calls and monitoring.

How to update

After downloading, follow the included instructions to update.
Choose the firmware that matches your unit's language version. Don't mix versions.

SZ150R Firmware

V1.2

Released: Mar 13, 2021
Type: LED light
Camera: Not camera-specific
Update with: See Godox notes

Download V1.2

Important Release Notes

What’s new

Upgraded the GM adjustment.

How to update

LED light.

TT350C Firmware

V1.7

Released: May 6, 2019
Type: Flash
Camera: Canon
Update with: Godox G2

Download V1.7

Important Release Notes

What’s new

Fixed compatibility with newer cameras such as the Canon EOS R, 1500D and 3000D.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

TT350F Firmware

V1.2

Released: Aug 15, 2018
Type: Flash
Camera: Fujifilm
Update with: Godox G2

Download V1.2

Important Release Notes

What’s new

Added a wireless ID setting to the C.Fn menu to reduce wireless interference.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

TT350N Firmware

V1.4

Released: Jun 17, 2021
Type: Flash
Camera: Nikon
Update with: Godox G2

Download V1.4

Important Release Notes

What’s new

Improved compatibility with the Nikon D780, Z6 and Z7.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

TT350O Firmware

V1.2

Released: Aug 15, 2018
Type: Flash
Camera: Olympus / Panasonic
Update with: Godox G2

Download V1.2

Important Release Notes

What’s new

Added a wireless ID setting to the C.Fn menu to reduce wireless interference.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

TT350P Firmware

V1.2

Released: Jun 6, 2019
Type: Flash
Camera: Pentax
Update with: Godox G3

Download V1.2

Important Release Notes

What’s new

Fixed an issue where the XPro sometimes couldn't fire the flash with its TEST button in wireless TTL mode.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

TT350S Firmware

V1.8

Released: Aug 15, 2018
Type: Flash
Camera: Sony
Update with: Godox G2

Download V1.8

Important Release Notes

What’s new

Added a wireless ID setting to the C.Fn menu to reduce wireless interference.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

TT685C Firmware

V3.4

Released: May 7, 2019
Type: Flash
Camera: Canon
Update with: Godox G1

Download V3.4

Important Release Notes

What’s new

Fixed compatibility with the Canon EOS R, 1500D (2000D / Rebel T7) and 3000D (4000D).
Compatible with the Godox wireless X system for Pentax.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

TT685F Firmware

V1.1

Released: Dec 1, 2017
Type: Flash
Camera: Fujifilm
Update with: Godox G1

Download V1.1

Important Release Notes

What’s new

Added a wireless ID option (C.Fn-ID).
Added an on/off option for the slave mode indicator (C.Fn-Sv LED).

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

TT685N Firmware

V3.3

Released: Dec 18, 2020
Type: Flash
Camera: Nikon
Update with: Godox G1

Download V3.3

Important Release Notes

What’s new

Compatible with the Nikon D780's hot shoe protocol.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

TT685O Firmware

V1.2

Released: Dec 1, 2017
Type: Flash
Camera: Olympus / Panasonic
Update with: Godox G1

Download V1.2

Important Release Notes

What’s new

Added a wireless ID option (C.Fn-ID).
Added an on/off option for the slave mode indicator (C.Fn-Sv LED).

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

TT685S Firmware

V2.1

Released: Dec 1, 2017
Type: Flash
Camera: Sony
Update with: Godox G1

Download V2.1

Important Release Notes

What’s new

Added a wireless ID option (C.Fn-ID).
Added an on/off option for the slave mode indicator (C.Fn-Sv LED).
The flash can now be fired with the TEST button while it's on the camera.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

UHF WMicS1_TX Firmware

V2.00_20

Released: Aug 5, 2021
Type: Audio
Camera: Not camera-specific
Update with: See Godox notes

Download V2.00_20

Important Release Notes

What’s new

Improved crystal frequency selection.

How to update

Firmware for the UHF WMicS1 transmitter.

UL150Bi II Firmware

V1.02

Released: Oct 25, 2024
Type: LED light
Camera: Not camera-specific
Update with: USB drive

Download V1.02

Important Release Notes

What’s new

Changed the DMX channel layout: channel 1 is now brightness.

How to update

Format a USB flash drive as FAT32 and copy the firmware (.bin) file to its root folder. Only one firmware file can be on the drive.
Plug the drive into the light's USB port and turn the light on. Wait for the update progress bar to finish.

UL150II Firmware

V1.05

Released: Oct 25, 2024
Type: LED light
Camera: Not camera-specific
Update with: USB drive

Download V1.05

Important Release Notes

What’s new

Changed the DMX channel layout: channel 1 is now brightness.

How to update

Format a USB flash drive as FAT32 and copy the firmware (.bin) file to its root folder. Only one firmware file can be on the drive.
Plug the drive into the light's USB port and turn the light on. Wait for the update progress bar to finish.

UP-C150 Firmware

V1.06

Released: May 26, 2026
Type: LED light
Camera: Not camera-specific
Update with: USB drive

Download V1.06

Important Release Notes

What’s new

Adjusted the GM zero point in Special Effects mode.

How to update

Format a USB flash drive as FAT32 and copy the firmware (.bin) file to its root folder. Only one firmware file can be on the drive.
Plug the drive into the light's USB port, then turn the light on. Wait for the update progress bar to finish.

V100C Firmware

V1.11

Released: Dec 8, 2025
Type: Flash
Camera: Canon
Update with: Godox G3

Download V1.11Shop the V100C

Important Release Notes

What’s new

New: the SU-1 switch setting is remembered after power-off.
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
Improved bounce flash TTL.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).

V100F Firmware

V1.03

Released: Dec 8, 2025
Type: Flash
Camera: Fujifilm
Update with: Godox G3

Download V1.03Shop the V100F

Important Release Notes

What’s new

New: the SU-1 switch setting is remembered after power-off.
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).

V100N Firmware

V1.05

Released: Apr 10, 2026
Type: Flash
Camera: Nikon
Update with: Godox G3

Download V1.05Shop the V100N

Important Release Notes

What’s new

Fixed occasional misfiring when used with the Nikon Z8 and Z9.

How to update

Update with Godox G3 V1.1 (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).

V100O Firmware

V1.04

Released: Dec 8, 2025
Type: Flash
Camera: Olympus / Panasonic
Update with: Godox G3

Download V1.04Shop the V100O

Important Release Notes

What’s new

New: the SU-1 switch setting is remembered after power-off.
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).

V100S Firmware

V1.06

Released: Dec 8, 2025
Type: Flash
Camera: Sony
Update with: Godox G3

Download V1.06Shop the V100S

Important Release Notes

What’s new

New: the SU-1 switch setting is remembered after power-off.
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).

V1C Firmware

V2.0

Released: Sep 25, 2025
Type: Flash
Camera: Canon
Update with: Godox G3

Download V2.0Shop the V1C

Important Release Notes

What’s new

Added compatibility with the new flash tube.

How to update

Update with Godox G3 (see the Update Software section of this page).
To check the version: turn the device on and press MENU to open the C.Fn menu. The version (Ver x.x) is shown in the top right corner of the screen.

V1F Firmware

V1.3

Released: Aug 19, 2022
Type: Flash
Camera: Fujifilm
Update with: Godox G3

Download V1.3Shop the V1F

Important Release Notes

What’s new

Added compatibility with the Godox XPro II L wireless flash trigger for Leica.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

V1mid N Firmware

V1.01

Released: Apr 10, 2026
Type: Flash
Camera: Nikon
Update with: Godox G3

Download V1.01Shop the V1mid N

Important Release Notes

What’s new

Fixed occasional misfiring when used with the Nikon Z8 and Z9.

How to update

Use Godox G3 V1.1 or later to open this firmware file and run the update (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).

V1N Firmware

V1.6

Released: Aug 19, 2022
Type: Flash
Camera: Nikon
Update with: Godox G3

Download V1.6Shop the V1N

Important Release Notes

What’s new

Added compatibility with the Godox XPro II L wireless flash trigger for Leica.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

V1O Firmware

V1.3

Released: Aug 19, 2022
Type: Flash
Camera: Olympus / Panasonic
Update with: Godox G3

Download V1.3

Important Release Notes

What’s new

Added compatibility with the Godox XPro II L wireless flash trigger for Leica.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

V1P Firmware

V1.2

Released: Sep 4, 2020
Type: Flash
Camera: Pentax
Update with: Godox G3

Download V1.2

Important Release Notes

What’s new

Added a lock: press and hold MODE for 2 seconds.
The display now shows "RX" instead of "Slave".

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

V1Pro C Firmware

V1.2

Released: Jul 8, 2025
Type: Flash
Camera: Canon
Update with: Godox G3

Download V1.2Shop the V1Pro C

Important Release Notes

How to update

Update with Godox G3 (see the Update Software section of this page).
To check the version: turn the flash on and press MENU to open the C.Fn menu. The version (Ver x.x) is shown in the top right corner.

V1Pro F Firmware

V1.1

Released: Jul 8, 2025
Type: Flash
Camera: Fujifilm
Update with: Godox G3

Download V1.1Shop the V1Pro F

Important Release Notes

How to update

Update with Godox G3 (see the Update Software section of this page).
To check the version: turn the flash on and press MENU to open the C.Fn menu. The version (Ver x.x) is shown in the top right corner.

V1Pro N Firmware

V1.2

Released: Jul 8, 2025
Type: Flash
Camera: Nikon
Update with: Godox G3

Download V1.2Shop the V1Pro N

Important Release Notes

How to update

Update with Godox G3 (see the Update Software section of this page).
To check the version: turn the flash on and press MENU to open the C.Fn menu. The version (Ver x.x) is shown in the top right corner.

V1Pro O Firmware

V1.1

Released: Jul 8, 2025
Type: Flash
Camera: Olympus / Panasonic
Update with: Godox G3

Download V1.1Shop the V1Pro O

Important Release Notes

How to update

Update with Godox G3 (see the Update Software section of this page).
To check the version: turn the flash on and press MENU to open the C.Fn menu. The version (Ver x.x) is shown in the top right corner.

V1Pro S Firmware

V1.2

Released: Jul 8, 2025
Type: Flash
Camera: Sony
Update with: Godox G3

Download V1.2Shop the V1Pro S

Important Release Notes

How to update

Update with Godox G3 (see the Update Software section of this page).
To check the version: turn the flash on and press MENU to open the C.Fn menu. The version (Ver x.x) is shown in the top right corner.

V1S Firmware

V1.8

Released: Aug 19, 2022
Type: Flash
Camera: Sony
Update with: Godox G3

Download V1.8Shop the V1S

Important Release Notes

What’s new

Added compatibility with the Godox XPro II L wireless flash trigger for Leica.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

V350C Firmware

V1.1

Released: May 6, 2019
Type: Flash
Camera: Canon
Update with: Godox G2

Download V1.1

Important Release Notes

What’s new

Fixed compatibility with the Canon EOS R, 1500D and 3000D.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

V350F Firmware

V1.0

Released: Oct 6, 2018
Type: Flash
Camera: Fujifilm
Update with: Godox G2

Download V1.0

Important Release Notes

What’s new

Original release.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

V350N Firmware

V1.1

Released: Jun 17, 2021
Type: Flash
Camera: Nikon
Update with: Godox G2

Download V1.1

Important Release Notes

What’s new

Improved compatibility with the Nikon D780, Z6 and Z7.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

V350O Firmware

V1.0

Released: Oct 6, 2018
Type: Flash
Camera: Olympus / Panasonic
Update with: Godox G2

Download V1.0

Important Release Notes

What’s new

Original release.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

V350S Firmware

V1.0

Released: Oct 6, 2018
Type: Flash
Camera: Sony
Update with: Godox G2

Download V1.0

Important Release Notes

What’s new

Original release.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

V480C Firmware

V1.03

Released: Feb 11, 2026
Type: Flash
Camera: Canon
Update with: Godox G3

Download V1.03Shop the V480C

Important Release Notes

What’s new

New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
New: wireless trigger distance options in the menu, including a short-range setting.
Fixed high-speed sync compatibility with the Canon R1, R6 Mark III, R50 V and PowerShot V1.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).

V480F Firmware

V1.03

Released: Feb 11, 2026
Type: Flash
Camera: Fujifilm
Update with: Godox G3

Download V1.03Shop the V480F

Important Release Notes

What’s new

New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
New: wireless trigger distance options in the menu, including a short-range setting.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).

V480N Firmware

V1.04

Released: Apr 10, 2026
Type: Flash
Camera: Nikon
Update with: Godox G3

Download V1.04Shop the V480N

Important Release Notes

What’s new

Fixed occasional misfiring when used with the Nikon Z8 and Z9.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).

V480O Firmware

V1.03

Released: Feb 11, 2026
Type: Flash
Camera: Olympus / Panasonic
Update with: Godox G3

Download V1.03Shop the V480O

Important Release Notes

What’s new

New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
New: wireless trigger distance options in the menu, including a short-range setting.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).

V480S Firmware

V1.03

Released: Feb 11, 2026
Type: Flash
Camera: Sony
Update with: Godox G3

Download V1.03Shop the V480S

Important Release Notes

What’s new

New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
New: wireless trigger distance options in the menu, including a short-range setting.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).

V860IIC Firmware

V1.8

Released: Apr 26, 2019
Type: Flash
Camera: Canon
Update with: Godox G1

Download V1.8

Important Release Notes

What’s new

Fixed compatibility with newer cameras such as the Canon EOS R, 1500D (2000D / Rebel T7) and 3000D (4000D).

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

V860IIF Firmware

V1.2

Released: Oct 24, 2018
Type: Flash
Camera: Fujifilm
Update with: Godox G1

Download V1.2

Important Release Notes

What’s new

Compatible with the Godox wireless X system for Pentax.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

V860IIIC Firmware

V1.3

Released: Aug 19, 2022
Type: Flash
Camera: Canon
Update with: Godox G3

Download V1.3Shop the V860IIIC

Important Release Notes

What’s new

Added compatibility with the Godox XPro II L wireless flash trigger for Leica.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

V860IIIF Firmware

V1.1

Released: Aug 19, 2022
Type: Flash
Camera: Fujifilm
Update with: Godox G3

Download V1.1Shop the V860IIIF

Important Release Notes

What’s new

Added compatibility with the Godox XPro II L wireless flash trigger for Leica.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

V860IIIN Firmware

V1.1

Released: Aug 19, 2022
Type: Flash
Camera: Nikon
Update with: Godox G3

Download V1.1Shop the V860IIIN

Important Release Notes

What’s new

Added compatibility with the Godox XPro II L wireless flash trigger for Leica.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

V860IIIO Firmware

V1.1

Released: Aug 19, 2022
Type: Flash
Camera: Olympus / Panasonic
Update with: Godox G3

Download V1.1Shop the V860IIIO

Important Release Notes

What’s new

Added compatibility with the Godox XPro II L wireless flash trigger for Leica.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

V860IIIS Firmware

V1.1

Released: Aug 19, 2022
Type: Flash
Camera: Sony
Update with: Godox G3

Download V1.1Shop the V860IIIS

Important Release Notes

What’s new

Added compatibility with the Godox XPro II L wireless flash trigger for Leica.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

V860IIN Firmware

V1.9

Released: Jun 9, 2020
Type: Flash
Camera: Nikon
Update with: Godox G1

Download V1.9

Important Release Notes

What’s new

Fixed compatibility with the Nikon D780.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

V860IIO Firmware

V1.4

Released: Oct 24, 2018
Type: Flash
Camera: Olympus / Panasonic
Update with: Godox G1

Download V1.4

Important Release Notes

What’s new

Compatible with the Godox wireless X system for Pentax.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

V860IIS Firmware

V1.7

Released: Oct 24, 2018
Type: Flash
Camera: Sony
Update with: Godox G1

Download V1.7

Important Release Notes

What’s new

Compatible with the Godox wireless X system for Pentax.
Improved the hot shoe.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

WMicS1 Pro Firmware

V1.6

Released: Mar 27, 2023
Type: Audio
Camera: Not camera-specific
Update with: See Godox notes

Check first: Each device needs two files updated: Main and Code. Choose the files and update mode exactly as specified, or the device won't work properly. You need a USB-C cable and a computer running Windows XP, Windows 7, Windows 10 or Windows 11.

Download V1.6

Important Release Notes

How to update

Each device needs two files updated: Main and Code. Choose the files and update mode exactly as specified, or the device won't work properly.
You need a USB-C cable and a computer running Windows XP, Windows 7, Windows 10 or Windows 11.

WMicS1_RX Universality Firmware

V2.00 21

Released: Aug 28, 2023
Type: Audio
Camera: Not camera-specific
Update with: Godox G3

Download V2.00 21

Important Release Notes

What’s new

Improved the receiver's wireless reception.

How to update

Download Godox G3 and the WMicS1 universal firmware from this page.
To check the version: Main Menu > Version.

X1R-C Firmware

V18.1

Released: Nov 29, 2019
Type: Trigger / receiver
Camera: Canon
Update with: Godox G1

Download V18.1Shop the X1R-C

Important Release Notes

What’s new

You can now set an RF ID. Hold CH and GR together while turning the receiver on to open the RF ID screen.
Press (short or long) CH to raise the ID, or GR to lower it.
After 5 seconds, turn the receiver off to save the ID. When you turn it back on, it uses that ID for wireless reception.
Fixed Zoom 135 mm and 200 mm not being selectable on the Canon 600EX II-RT.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

X1R-C Firmware

V26

Released: Jun 5, 2024
Type: Trigger / receiver
Camera: Canon
Update with: Godox G3

Download V26Shop the X1R-C

Important Release Notes

What’s new

Fixed some minor issues.

How to update

Use Godox G3 to open the firmware and run the update (see the Update Software section of this page).

X1R-N Firmware

V22

Released: Feb 29, 2024
Type: Trigger / receiver
Camera: Nikon
Update with: Godox G1

Download V22Shop the X1R-N

Important Release Notes

What’s new

Fixed possible abnormal flash behaviour on the receiver when using high-speed flash after pressing TEST.
Fixed the display backlight turning on irregularly on a flash mounted on the receiver's top hot shoe.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

X1R-N Firmware

V22

Released: Jun 5, 2024
Type: Trigger / receiver
Camera: Nikon
Update with: Godox G3

Download V22Shop the X1R-N

Important Release Notes

What’s new

Fixed possible abnormal flash behaviour on the receiver when using high-speed flash after pressing TEST.
Fixed the display backlight turning on irregularly on a flash mounted on the receiver's top hot shoe.
Fixed some minor issues.

How to update

Use Godox G3 to open the firmware and run the update (see the Update Software section of this page).

X1R-S Firmware

V05

Released: Jan 10, 2018
Type: Trigger / receiver
Camera: Sony
Update with: Godox G1

Download V05

Important Release Notes

What’s new

You can now set an RF ID. Hold CH and GR together while turning the receiver on to open the RF ID screen.
Press (short or long) CH to raise the ID, or GR to lower it.
After 5 seconds, turn the receiver off to save the ID. When you turn it back on, it uses that ID for wireless reception.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

X1R-S Firmware

V05

Released: Jun 5, 2024
Type: Trigger / receiver
Camera: Sony
Update with: Godox G3

Download V05

Important Release Notes

What’s new

New: you can set an RF ID. Hold CH and GR together while turning the receiver on to open the RF ID screen.
Press (short or long) CH to raise the ID, or GR to lower it.
After 5 seconds, turn the receiver off to save the ID. When you turn it on normally, it uses that ID for wireless reception.
Fixed some minor issues.

How to update

Use Godox G3 to open the firmware and run the update (see the Update Software section of this page).

X1T-C Firmware

V27

Released: Jun 18, 2019
Type: Trigger / receiver
Camera: Canon
Update with: Godox G1

Download V27

Important Release Notes

What’s new

Added support for the Canon EOS 200D II (Rebel SL3 / Kiss X10).
Added support for the Canon EOS RP.
Fixed compatibility with the Canon EOS R.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

X1T-F Firmware

V0.7

Released: Nov 9, 2020
Type: Trigger / receiver
Camera: Fujifilm
Update with: Godox G2

Download V0.7

Important Release Notes

What’s new

Improved communication with the same cameras.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

X1T-N Firmware

V25

Released: Dec 22, 2020
Type: Trigger / receiver
Camera: Nikon
Update with: Godox G1

Download V25

Important Release Notes

What’s new

Fixed overexposure with an on-camera flash on the Nikon Z6 and Z7.

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

X1T-O Firmware

V06

Released: Oct 22, 2019
Type: Trigger / receiver
Camera: Olympus / Panasonic
Update with: Godox G2

Download V06Shop the X1T-O

Important Release Notes

What’s new

Fixed missed triggering during continuous shooting with Panasonic cameras such as the S1R.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

X1T-S Firmware

V19

Released: Nov 10, 2023
Type: Trigger / receiver
Camera: Sony
Update with: Godox G1

Download V19

Important Release Notes

What’s new

C.Fn-10 AF-OPT (AF assist): the default is now set for mirrorless cameras (00 = mirrorless; 01 = DSLR).

How to update

Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).

X2T-C Firmware

V1.4

Released: Jun 30, 2022
Type: Trigger / receiver
Camera: Canon
Update with: Godox G3

Download V1.4Shop the X2T-C

Important Release Notes

What’s new

Updated to match the latest Godox flash app.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

X2T-C Firmware（Z01 Version）

V1.4

Released: Aug 1, 2023
Type: Trigger / receiver
Camera: Canon
Update with: Godox G3

Check first: Only for X2T-C triggers marked Z01: look for a code ending in Z01 printed on the casing (near the USB port or on the battery cover) or a Z01 sticker near the USB port.

Download V1.4Shop the X2T-C Firmware（Z01 Version）

Important Release Notes

What’s new

Updated to match the latest Godox flash app.
Only for X2T-C triggers marked Z01: look for a code ending in Z01 printed on the casing (near the USB port or on the battery cover) or a Z01 sticker near the USB port.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

X2T-C Firmware（Z02 Version）

V1.01

Released: Jul 25, 2025
Type: Trigger / receiver
Camera: Canon
Update with: Godox G3

Check first: Only for X2T-C triggers marked Z02: look for a code ending in Z02 printed on the casing (near the USB port or on the battery cover) or a Z02 sticker near the USB port.

Download V1.01Shop the X2T-C Firmware（Z02 Version）

Important Release Notes

What’s new

Added support for Canon EOS R series cameras (the receiver side should already support them).
Only for X2T-C triggers marked Z02: look for a code ending in Z02 printed on the casing (near the USB port or on the battery cover) or a Z02 sticker near the USB port.

How to update

Before you update, download and install Godox G3 V2.0 (see the Update Software section of this page).

X2T-F Firmware

V1.4

Released: Aug 22, 2022
Type: Trigger / receiver
Camera: Fujifilm
Update with: Godox G3

Download V1.4Shop the X2T-F

Important Release Notes

What’s new

Added compatibility with the Fujifilm X-S10, GFX100S and X-H2S.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

X2T-N Firmware

V1.43

Released: Mar 30, 2026
Type: Trigger / receiver
Camera: Nikon
Update with: Godox G3

Download V1.43Shop the X2T-N

Important Release Notes

What’s new

Fixed misfiring with the Nikon Z9 and Z8.
Fixed some minor issues.

How to update

Update with Godox G3 for Windows V1.1 or Godox G3 for macOS V1.1 (both in the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

X2T-N Firmware（Z01 Version）

V1.33

Released: Mar 30, 2026
Type: Trigger / receiver
Camera: Nikon
Update with: Godox G3

Check first: Only for X2T-N triggers marked Z01: look for a code ending in Z01 printed on the casing (near the USB port or on the battery cover) or a Z01 sticker near the USB port.

Download V1.33Shop the X2T-N Firmware（Z01 Version）

Important Release Notes

What’s new

Fixed misfiring with the Nikon Z9 and Z8.
Fixed some minor issues.
Only for X2T-N triggers marked Z01: look for a code ending in Z01 printed on the casing (near the USB port or on the battery cover) or a Z01 sticker near the USB port.

How to update

Update with Godox G3 for Windows V1.1 or Godox G3 for macOS V1.1 (both in the Update Software section of this page).
Only for X2T-N triggers marked Z01: look for a code ending in Z01 printed on the casing (near the USB port or on the battery cover) or a Z01 sticker near the USB port.

X2T-O Firmware

V1.3

Released: Jun 30, 2022
Type: Trigger / receiver
Camera: Olympus / Panasonic
Update with: Godox G3

Download V1.3Shop the X2T-O

Important Release Notes

What’s new

Updated to match the latest Godox flash app.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

X2T-P Firmware

V1.3

Released: Aug 2, 2022
Type: Trigger / receiver
Camera: Pentax
Update with: Godox G3

Download V1.3Shop the X2T-P

Important Release Notes

What’s new

Fixed the CH value not being settable after the V1.2 firmware update.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

X2T-S Firmware

V1.4

Released: Jun 30, 2022
Type: Trigger / receiver
Camera: Sony
Update with: Godox G3

Download V1.4Shop the X2T-S

Important Release Notes

What’s new

Updated to match the latest Godox flash app.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

X2T-S Firmware（Z01 Version）

V1.4

Released: Aug 1, 2023
Type: Trigger / receiver
Camera: Sony
Update with: Godox G3

Check first: Only for X2T-S triggers marked Z01: look for a code ending in Z01 printed on the casing (near the USB port or on the battery cover) or a Z01 sticker near the USB port.

Download V1.4Shop the X2T-S Firmware（Z01 Version）

Important Release Notes

What’s new

Updated to match the latest Godox flash app.
Only for X2T-S triggers marked Z01: look for a code ending in Z01 printed on the casing (near the USB port or on the battery cover) or a Z01 sticker near the USB port.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

X3-C Firmware

V1.38

Released: Apr 7, 2026
Type: Trigger / receiver
Camera: Canon
Update with: Godox G3

Download V1.38Shop the X3-C

Important Release Notes

What’s new

Added support for Canon EOS R series cameras.
Requires Godox G3 V1.1 or later to update.

How to update

Update with Godox G3 for Windows V1.1 or Godox G3 for macOS V1.1 (both in the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

X3-C Firmware Initial Language Updating

V1.17

Released: Jun 11, 2024
Type: Trigger / receiver
Camera: Canon
Update with: Godox G3

Check first: This file changes the X3-C's initial language to English.

Download V1.17Shop the X3-C Firmware Initial Language Updating

Important Release Notes

What’s new

Changes the initial language to English.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

X3-F Firmware

V1.21

Released: Mar 30, 2026
Type: Trigger / receiver
Camera: Fujifilm
Update with: Godox G3

Download V1.21Shop the X3-F

Important Release Notes

What’s new

Improved control performance and camera connection.
Fixed some minor issues.
Requires Godox G3 V1.1 or later to update.

How to update

Update with Godox G3 for Windows V1.1 or Godox G3 for macOS V1.1 (both in the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

X3-L Firmware

V1.11

Released: Mar 30, 2026
Type: Trigger / receiver
Camera: Leica
Update with: Godox G3

Download V1.11Shop the X3-L

Important Release Notes

What’s new

Added support for the Leica SL3 and Q3.
Fixed some minor issues.
Requires Godox G3 V1.1 or later to update.

How to update

Update with Godox G3 for Windows V1.1 or Godox G3 for macOS V1.1 (both in the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

X3-N Firmware

V1.27

Released: Mar 30, 2026
Type: Trigger / receiver
Camera: Nikon
Update with: Godox G3

Download V1.27Shop the X3-N

Important Release Notes

What’s new

Improved control performance and camera connection.
Designed for use with the XR receiver.
Requires Godox G3 V1.1 or later to update.

How to update

Update with Godox G3 for Windows V1.1 or Godox G3 for macOS V1.1 (both in the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

X3-N Firmware Initial Language Updating

V1.07

Released: Jun 11, 2024
Type: Trigger / receiver
Camera: Nikon
Update with: Godox G3

Check first: This file changes the X3-N's initial language to English.

Download V1.07Shop the X3-N Firmware Initial Language Updating

Important Release Notes

What’s new

Changes the initial language to English.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

X3-O Firmware

V1.09

Released: Jul 18, 2025
Type: Trigger / receiver
Camera: Olympus / Panasonic
Update with: Godox G3

Download V1.09Shop the X3-O

Important Release Notes

What’s new

Improved control processing and camera connection.

How to update

Update with Godox G3 version 1.1 or later (see the Update Software section of this page).

X3-S Firmware

V1.25

Released: Mar 30, 2026
Type: Trigger / receiver
Camera: Sony
Update with: Godox G3

Download V1.25Shop the X3-S

Important Release Notes

What’s new

Improved control performance and camera connection.
Designed for use with the XRS receiver.
Requires Godox G3 V1.1 or later to update.

How to update

Update with Godox G3 for Windows V1.1 or Godox G3 for macOS V1.1 (both in the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

X3-S Firmware Initial Language Updating

V1.07

Released: Jun 11, 2024
Type: Trigger / receiver
Camera: Sony
Update with: Godox G3

Check first: This file changes the X3-S's initial language to English.

Download V1.07Shop the X3-S Firmware Initial Language Updating

Important Release Notes

What’s new

Changes the initial language to English.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

X3ProC Firmware

V1.22

Released: Aug 14, 2026
Type: Trigger / receiver
Camera: Canon
Update with: Godox G3

Download V1.22Shop the X3ProC

Important Release Notes

What’s new

Updated the user interface.
Added support for LED flash control.

How to update

Update with Godox G3 for Windows V2.0 or Godox G3 for macOS V2.0 (both in the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

X3ProF Firmware

V1.08

Released: Aug 14, 2026
Type: Trigger / receiver
Camera: Fujifilm
Update with: Godox G3

Download V1.08Shop the X3ProF

Important Release Notes

What’s new

Updated the user interface.
Added support for LED flash control.

How to update

Update with Godox G3 for Windows V2.0 or Godox G3 for macOS V2.0 (both in the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

X3ProN Firmware

V1.14

Released: Aug 14, 2026
Type: Trigger / receiver
Camera: Nikon
Update with: Godox G3

Download V1.14Shop the X3ProN

Important Release Notes

What’s new

Updated the user interface.
Added support for LED flash control.

How to update

Update with Godox G3 for Windows V2.0 or Godox G3 for macOS V2.0 (both in the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

X3ProO Firmware

V1.08

Released: Aug 14, 2026
Type: Trigger / receiver
Camera: Olympus / Panasonic
Update with: Godox G3

Download V1.08Shop the X3ProO

Important Release Notes

What’s new

Updated the user interface.
Added support for LED flash control.

How to update

Update with Godox G3 for Windows V2.0 or Godox G3 for macOS V2.0 (both in the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

X3ProS Firmware

V1.11

Released: Aug 14, 2026
Type: Trigger / receiver
Camera: Sony
Update with: Godox G3

Download V1.11Shop the X3ProS

Important Release Notes

What’s new

Updated the user interface.
Added support for LED flash control.

How to update

Update with Godox G3 for Windows V2.0 or Godox G3 for macOS V2.0 (both in the Update Software section of this page).
To check the version: turn the device on and open Device Info in the menu settings. The version is shown as, for example, V1.1 (version 1.1).

Xpro-C Firmware

V2.0

Released: Dec 30, 2020
Type: Trigger / receiver
Camera: Canon
Update with: Godox G2

Download V2.0

Important Release Notes

What’s new

Compatible with the Canon EOS 200D II (Rebel SL3 / Kiss X10).

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

Xpro-F Firmware

V1.3

Released: Nov 9, 2020
Type: Trigger / receiver
Camera: Fujifilm
Update with: Godox G2

Download V1.3

Important Release Notes

What’s new

Added a decimal display for the power value.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

Xpro-N Firmware

V1.7

Released: Nov 9, 2020
Type: Trigger / receiver
Camera: Nikon
Update with: Godox G2

Download V1.7

Important Release Notes

What’s new

Added a decimal display for the power value.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

Xpro-O Firmware

V1.3

Released: Nov 9, 2020
Type: Trigger / receiver
Camera: Olympus / Panasonic
Update with: Godox G2

Download V1.3

Important Release Notes

What’s new

Added a decimal display for the power value.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

Xpro-P Firmware

V1.2

Released: Nov 9, 2020
Type: Trigger / receiver
Camera: Pentax
Update with: Godox G3

Download V1.2

Important Release Notes

What’s new

Added a decimal display for the power value.

How to update

Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).

Xpro-S Firmware

V1.3

Released: Nov 9, 2020
Type: Trigger / receiver
Camera: Sony
Update with: Godox G2

Download V1.3

Important Release Notes

What’s new

Added a decimal display for the power value.

How to update

Before you update, download and install the Godox G2 firmware launcher (see the Update Software section of this page).

XProII-C Firmware

V1.52

Released: Mar 30, 2026
Type: Trigger / receiver
Camera: Canon
Update with: Godox G3

Download V1.52Shop the XProII-C

Important Release Notes

What’s new

Added support for Canon EOS R series cameras, fixing overexposure of the main flash in high-speed TTL mode.
Updated to work with the XRS receiver.
Fixed some minor issues.

How to update

Update the XPro II-C with Godox G3 (see the Update Software section of this page).
To check the version: turn the transmitter on and press MENU to open the menu settings. The version is shown in the upper right corner of the screen (for example, V1.1 for version 1.1).

XProII-F Firmware

V1.48

Released: Mar 30, 2026
Type: Trigger / receiver
Camera: Fujifilm
Update with: Godox G3

Download V1.48Shop the XProII-F

Important Release Notes

What’s new

Fixed some minor issues.

How to update

Update the XPro II-F with Godox G3 (see the Update Software section of this page).
To check the version: turn the transmitter on and press MENU to open the menu settings. The version is shown in the upper right corner of the screen (for example, V1.1 for version 1.1).

XProII-L Firmware

V1.51

Released: Apr 9, 2026
Type: Trigger / receiver
Camera: Leica
Update with: Godox G3

Download V1.51Shop the XProII-L

Important Release Notes

What’s new

Added support for the Leica SL3 and Q3.
Fixed some minor issues.

How to update

Update the XPro II-L with Godox G3 (see the Update Software section of this page).
To check the version: turn the transmitter on and press MENU to open the menu settings. The version is shown in the upper right corner of the screen (for example, V1.1 for version 1.1).

XProII-N Firmware

V1.56

Released: Mar 30, 2026
Type: Trigger / receiver
Camera: Nikon
Update with: Godox G3

Download V1.56Shop the XProII-N

Important Release Notes

What’s new

Updated for compatibility with the XR receiver.
Fixed some minor issues.

How to update

Update the XPro II-N with Godox G3 (see the Update Software section of this page).
To check the version: turn the transmitter on and press MENU to open the menu settings. The version is shown in the upper right corner of the screen (for example, V1.1 for version 1.1).

XProII-O Firmware

V1.48

Released: Mar 30, 2026
Type: Trigger / receiver
Camera: Olympus / Panasonic
Update with: Godox G3

Download V1.48Shop the XProII-O

Important Release Notes

What’s new

Fixed some minor issues.

How to update

Update the XPro II-O with Godox G3 (see the Update Software section of this page).
To check the version: turn the transmitter on and press MENU to open the menu settings. The version is shown in the upper right corner of the screen (for example, V1.1 for version 1.1).

XProII-S Firmware

V1.39

Released: Mar 30, 2026
Type: Trigger / receiver
Camera: Sony
Update with: Godox G3

Download V1.39Shop the XProII-S

Important Release Notes

What’s new

Updated for compatibility with the XR receiver.
Fixed some minor issues.

How to update

Update the XPro II-S with Godox G3 (see the Update Software section of this page).
To check the version: turn the transmitter on and press MENU to open the menu settings. The version is shown in the upper right corner of the screen (for example, V1.1 for version 1.1).

XR Firmware

V1.04

Released: Apr 15, 2026
Type: Trigger / receiver
Camera: Not camera-specific
Update with: Godox G3

Download V1.04

Important Release Notes

What’s new

Fixed the camera shutter firing continuously when the XR is connected to the camera.

How to update

Use Godox G3 V1.1 or later to open the firmware and run the update (see the Update Software section of this page).
Steps: turn the XR receiver off, press and hold the button (Godox's notes don't say which one), then connect it to the computer by USB. The XR opens its firmware upgrade screen. Run the update in G3 on the computer.

XRS Firmware

V1.04

Released: Apr 15, 2026
Type: Trigger / receiver
Camera: Not camera-specific
Update with: Godox G3

Download V1.04

Important Release Notes

What’s new

Fixed the camera shutter firing continuously when the XR is connected to the camera.
Fixed abnormal triggering with Nikon transmitters after the XR was triggered with HSS in "C" mode and then switched back to "N" mode.

How to update

Use Godox G3 V1.1 or later to open the firmware and run the update (see the Update Software section of this page).
Steps: turn the XRS receiver off, press and hold the button (Godox's notes don't say which one), then connect it to the computer by USB. The receiver opens its firmware upgrade screen. Run the update in G3 on the computer.

Frequently Asked Questions

How do I check which firmware version my Godox flash or trigger has?

Open the device’s menu. On most newer Godox flashes and triggers, the version appears under Device Info at the end of the menu (for example, V1.00). Many speedlights show it in the C.Fn menu instead. Each firmware card on this page includes Godox’s exact steps for that model.

Which Godox update software do I need: G1, G2 or G3?

Most current Godox gear uses G3, which is available for Windows 10 and 11 and for macOS Catalina to Sequoia. Older models, such as the TT685, V860II and the original XPro, use the G1 or G2 launcher. Every card on this page shows the right tool for that model.

Can a Godox firmware update brick my flash or trigger?

Yes, it can. Flashing the wrong file, letting the battery run low, or unplugging during the update can leave the device unusable. Match your exact model and camera letter, charge fully, and don’t disconnect. If you’re unsure, bring it in or drop it off and we’ll update it free.

Does Strobepro update Godox firmware for free?

Yes. Bring it in or drop it off at our Calgary warehouse and we’ll update it free, usually as soon as it comes in. As Canada’s Only In-House Godox Service Centre, we can also check and repair gear that isn’t working properly.

Why doesn’t Godox G3 detect my device on a Mac?

If G3 doesn’t show “Device connected successfully” and your Mac only has USB-C ports, Godox recommends connecting the USB cable through a hub. A USB-A port can connect directly. Also check that you’re using a USB data cable, not a charge-only cable.

Do I need to update my Godox trigger when I buy a new camera?

Often, yes. Godox regularly releases firmware that improves compatibility with new cameras. For example, iT32 V1.18 improved compatibility with the Leica M11, and iT30Pro C V1.02 fixed high-speed sync issues with the Canon R1, R6 Mark III, R50 V and PowerShot V1. Check your trigger’s card before your first shoot.