Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Godox Firmware Updates
Find the latest firmware for your Godox flash, trigger, LED light, monitor, microphone or intercom. Search for your model, download the file straight from Strobepro, then follow the steps for your update tool (G1, G2, G3, USB drive or SD card). This list covers everything on Godox’s official firmware pages. Rather not do it yourself? Bring it in or drop it off at our Calgary warehouse and we’ll update it free.
Need the firmware installer?
Expand for Godox G1, G2 and G3 software downloads.
Most current Godox flashes, triggers and receivers use Godox G3: V2.0 for Windows supports Windows 10 and Windows 11, and V2.0 for macOS supports macOS Catalina (10.15) to macOS Sequoia (15). Older gear uses the G1 or G2 launcher. Each firmware card below shows which one you need.
Mac tip from Godox: if G3 doesn’t show “Device connected successfully” and you’re using a USB-C port, connect the USB cable through a hub. A USB-A port can connect directly.
The macOS version supports macOS Catalina (10.15) to macOS Sequoia (15).
If G3 doesn't show "Device connected successfully" when you connect by USB: on a USB-C port, connect the USB cable through a hub. On a USB-A port, you can connect the cable directly.
Download and install Godox G3 for Windows or macOS from Need the firmware installer? below.
Check your current version. On most newer models, open the menu and go to Device Info at the end. The version is shown as V1.00, for example. Find your model in the list and compare.
Fully charge the battery.
Download your model’s file from this page. Unzip it if it’s a .zip, and use the .rar tool of your choice for .rar files.
Connect the device to your computer with a USB data cable, using the method in your model’s notes. Some models need you to power on and choose Firmware Upgrade in the menu. Others need you to hold a button (such as SET or MENU) while you plug in the cable.
Open the firmware file in G3, start the update, and wait. Don’t unplug or switch off until G3 says it’s finished.
Check the version again in the menu to confirm.
Updating with Godox G1 or G2 (older gear)
Install the G1 or G2 Launcher, as listed on your model’s card.
Fully charge the battery, then connect the device by USB.
Open the firmware file with the launcher and run the update. Don’t disconnect until it’s done.
Updating LED lights with a USB drive
Format a USB flash drive as FAT32.
Copy the firmware (.bin) file to the root of the drive. Godox says only one firmware file should be on the drive.
Insert the drive into the light’s USB port and follow your model’s notes. For example, some models need you to hold MODE while powering on. Wait for the progress bar to finish.
Updating Godox monitors with an SD card
Unzip the firmware to the root of an SD card.
Insert the card into the monitor and follow the steps in your model’s notes. Godox lists the version check as Menu → Setting → Upgrade.
Improved compatibility between the external USB433 module (FR433) and FT-16 transmitters.
Fixed a fault when using the FT433N transmitter with the FR433 module for high-speed sync on channel CH1.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, go to the Settings screen and open Device Info at the end. The version is shown as, for example, V1.00 (version 1.00).
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
Fixed high-speed sync compatibility with the Canon R1, R6 Mark III, R50 V and PowerShot V1.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Method 1: turn the device on, open the menu, go to Device Info, connect it to the computer by USB, then select Firmware Upgrade.
Method 2: with the device off, press and hold MENU, then connect it to the computer by USB and run the update.
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Method 1: turn the device on, open the menu, go to Device Info, connect it to the computer by USB, then select Firmware Upgrade.
Method 2: with the device off, press and hold MENU, then connect it to the computer by USB and run the update.
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Method 1: turn the device on, open the menu, go to Device Info, connect it to the computer by USB, then select Firmware Upgrade.
Method 2: with the device off, press and hold MENU, then connect it to the computer by USB and run the update.
Fixed occasional misfiring when used with the Nikon Z8 and Z9.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Method 1: turn the device on, open the menu, go to Device Info, connect it to the computer by USB, then select Firmware Upgrade.
Method 2: with the device off, press and hold MENU, then connect it to the computer by USB and run the update.
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Method 1: turn the device on, open the menu, go to Device Info, connect it to the computer by USB, then select Firmware Upgrade.
Method 2: with the device off, press and hold MENU, then connect it to the computer by USB and run the update.
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Method 1: turn the device on, open the menu, go to Device Info, connect it to the computer by USB, then select Firmware Upgrade.
Method 2: with the device off, press and hold MENU, then connect it to the computer by USB and run the update.
Check first: To update an X5: mount it on the iT32 while the iT32 is off, then press and hold the iT32's power button to turn it on. The X5 updates automatically if it isn't on the latest version. The X5L and X5Cm need iT32 firmware V1.16 or later to work properly.
Fixed an issue where the X5C and X5Cm didn't trigger off-camera (slave) flashes when the camera was in Auto mode.
Improved compatibility with the Leica M11.
How to update
Use Godox G3 V1.1 or later to open this firmware file and run the update (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
iT32, method 1: with the iT32 off, press and hold SET, then connect it to the computer by USB and run the update.
iT32, method 2: turn the iT32 on, open the menu, go to Device Info, connect it to the computer by USB, then select Firmware Upgrade.
Don't update when the battery is low.
X5: mount the X5 on the iT32 while the iT32 is off, then press and hold the iT32's power button to turn it on. The X5 updates automatically if it isn't on the latest version.
The X5L and X5Cm need iT32 firmware V1.16 or later to work properly.
Added 2.4G wireless sync to the menu. It copies the transmitter's channel and ID automatically, with no manual setup.
The default 2.4G channel is now 21, to match the transmitter's default channel.
How to update
Update with Godox G3 (see the Update Software section of this page).
To check the version: turn the light on and press MENU. The version is shown in the top right corner of the LCD (for example, V1.0 for version 1.0).
To set power and the modelling lamp on the P2400 by hand, without the transmitter (X3, X3 Pro or XPro II) overriding them, set the transmitter to L-858 mode.
New: the SU-1 switch setting is remembered after power-off.
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
Improved bounce flash TTL.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
New: the SU-1 switch setting is remembered after power-off.
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Fixed occasional misfiring when used with the Nikon Z8 and Z9.
How to update
Update with Godox G3 V1.1 (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
New: the SU-1 switch setting is remembered after power-off.
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
New: the SU-1 switch setting is remembered after power-off.
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Fixed occasional misfiring when used with the Nikon Z8 and Z9.
How to update
Use Godox G3 V1.1 or later to open this firmware file and run the update (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
New: wireless trigger distance options in the menu, including a short-range setting.
Fixed high-speed sync compatibility with the Canon R1, R6 Mark III, R50 V and PowerShot V1.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
New: wireless trigger distance options in the menu, including a short-range setting.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Fixed occasional misfiring when used with the Nikon Z8 and Z9.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
New: wireless trigger distance options in the menu, including a short-range setting.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
New: the screen lock setting is remembered after power-off.
New: you can turn off the power-on lock in the menu, so no unlock is needed at startup.
New: wireless trigger distance options in the menu, including a short-range setting.
How to update
Update with Godox G3 version 1.1 or later (see the Update Software section of this page).
To check the version: turn the device on, open the menu and go to Device Info at the very end. The version is shown as, for example, V1.00 (version 1.00).
Compatible with the Godox wireless X system for Pentax.
Improved the hot shoe.
How to update
Before you update, download and install the Godox G1 firmware launcher (see the Update Software section of this page).
WMicS1 Pro Firmware
V1.6
Released
Type
Audio
Camera
Not camera-specific
Update with
See Godox notes
Check first: Each device needs two files updated: Main and Code. Choose the files and update mode exactly as specified, or the device won't work properly.
You need a USB-C cable and a computer running Windows XP, Windows 7, Windows 10 or Windows 11.
Check first: Only for X2T-C triggers marked Z01: look for a code ending in Z01 printed on the casing (near the USB port or on the battery cover) or a Z01 sticker near the USB port.
Only for X2T-C triggers marked Z01: look for a code ending in Z01 printed on the casing (near the USB port or on the battery cover) or a Z01 sticker near the USB port.
How to update
Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).
Check first: Only for X2T-C triggers marked Z02: look for a code ending in Z02 printed on the casing (near the USB port or on the battery cover) or a Z02 sticker near the USB port.
Added support for Canon EOS R series cameras (the receiver side should already support them).
Only for X2T-C triggers marked Z02: look for a code ending in Z02 printed on the casing (near the USB port or on the battery cover) or a Z02 sticker near the USB port.
How to update
Before you update, download and install Godox G3 V2.0 (see the Update Software section of this page).
Check first: Only for X2T-N triggers marked Z01: look for a code ending in Z01 printed on the casing (near the USB port or on the battery cover) or a Z01 sticker near the USB port.
Only for X2T-N triggers marked Z01: look for a code ending in Z01 printed on the casing (near the USB port or on the battery cover) or a Z01 sticker near the USB port.
How to update
Update with Godox G3 for Windows V1.1 or Godox G3 for macOS V1.1 (both in the Update Software section of this page).
Only for X2T-N triggers marked Z01: look for a code ending in Z01 printed on the casing (near the USB port or on the battery cover) or a Z01 sticker near the USB port.
Check first: Only for X2T-S triggers marked Z01: look for a code ending in Z01 printed on the casing (near the USB port or on the battery cover) or a Z01 sticker near the USB port.
Only for X2T-S triggers marked Z01: look for a code ending in Z01 printed on the casing (near the USB port or on the battery cover) or a Z01 sticker near the USB port.
How to update
Before you update, download and install the Godox G3 firmware launcher (see the Update Software section of this page).
Added support for Canon EOS R series cameras, fixing overexposure of the main flash in high-speed TTL mode.
Updated to work with the XRS receiver.
Fixed some minor issues.
How to update
Update the XPro II-C with Godox G3 (see the Update Software section of this page).
To check the version: turn the transmitter on and press MENU to open the menu settings. The version is shown in the upper right corner of the screen (for example, V1.1 for version 1.1).
Update the XPro II-F with Godox G3 (see the Update Software section of this page).
To check the version: turn the transmitter on and press MENU to open the menu settings. The version is shown in the upper right corner of the screen (for example, V1.1 for version 1.1).
Update the XPro II-L with Godox G3 (see the Update Software section of this page).
To check the version: turn the transmitter on and press MENU to open the menu settings. The version is shown in the upper right corner of the screen (for example, V1.1 for version 1.1).
Update the XPro II-N with Godox G3 (see the Update Software section of this page).
To check the version: turn the transmitter on and press MENU to open the menu settings. The version is shown in the upper right corner of the screen (for example, V1.1 for version 1.1).
Update the XPro II-O with Godox G3 (see the Update Software section of this page).
To check the version: turn the transmitter on and press MENU to open the menu settings. The version is shown in the upper right corner of the screen (for example, V1.1 for version 1.1).
Update the XPro II-S with Godox G3 (see the Update Software section of this page).
To check the version: turn the transmitter on and press MENU to open the menu settings. The version is shown in the upper right corner of the screen (for example, V1.1 for version 1.1).
Fixed the camera shutter firing continuously when the XR is connected to the camera.
How to update
Use Godox G3 V1.1 or later to open the firmware and run the update (see the Update Software section of this page).
Steps: turn the XR receiver off, press and hold the button (Godox's notes don't say which one), then connect it to the computer by USB. The XR opens its firmware upgrade screen. Run the update in G3 on the computer.
Fixed the camera shutter firing continuously when the XR is connected to the camera.
Fixed abnormal triggering with Nikon transmitters after the XR was triggered with HSS in "C" mode and then switched back to "N" mode.
How to update
Use Godox G3 V1.1 or later to open the firmware and run the update (see the Update Software section of this page).
Steps: turn the XRS receiver off, press and hold the button (Godox's notes don't say which one), then connect it to the computer by USB. The receiver opens its firmware upgrade screen. Run the update in G3 on the computer.
No match. Try the model name without the camera letter (for example “X3” instead of “X3-C”), or ask us.
Free Godox Firmware Updates in Calgary
Rather not risk it? Bring it in or drop it off at our Calgary warehouse and we’ll update it free, usually as soon as it comes in. As Canada’s Only In-House Godox Service Centre, we also repair Godox lights and triggers. If something isn’t working after an update, start a service request.
Frequently Asked Questions
How do I check which firmware version my Godox flash or trigger has?
Open the device’s menu. On most newer Godox flashes and triggers, the version appears under Device Info at the end of the menu (for example, V1.00). Many speedlights show it in the C.Fn menu instead. Each firmware card on this page includes Godox’s exact steps for that model.
Which Godox update software do I need: G1, G2 or G3?
Most current Godox gear uses G3, which is available for Windows 10 and 11 and for macOS Catalina to Sequoia. Older models, such as the TT685, V860II and the original XPro, use the G1 or G2 launcher. Every card on this page shows the right tool for that model.
Can a Godox firmware update brick my flash or trigger?
Yes, it can. Flashing the wrong file, letting the battery run low, or unplugging during the update can leave the device unusable. Match your exact model and camera letter, charge fully, and don’t disconnect. If you’re unsure, bring it in or drop it off and we’ll update it free.
Does Strobepro update Godox firmware for free?
Yes. Bring it in or drop it off at our Calgary warehouse and we’ll update it free, usually as soon as it comes in. As Canada’s Only In-House Godox Service Centre, we can also check and repair gear that isn’t working properly.
Why doesn’t Godox G3 detect my device on a Mac?
If G3 doesn’t show “Device connected successfully” and your Mac only has USB-C ports, Godox recommends connecting the USB cable through a hub. A USB-A port can connect directly. Also check that you’re using a USB data cable, not a charge-only cable.
Do I need to update my Godox trigger when I buy a new camera?
Often, yes. Godox regularly releases firmware that improves compatibility with new cameras. For example, iT32 V1.18 improved compatibility with the Leica M11, and iT30Pro C V1.02 fixed high-speed sync issues with the Canon R1, R6 Mark III, R50 V and PowerShot V1. Check your trigger’s card before your first shoot.
