Godox's beloved V860 flashes just keep getting better! Built around a rechargeable lithium battery, these flashes have been outperforming speedlites from the big camera brands since 2015. This third iteration brings a suite of performance and quality of life upgrades. Once you use one, you'll never look back!
The Strobepro Difference
Strobepro is the largest distributor of Godox products in Canada. Give yourself peace of mind with Strobepro's helpful staff, in-house 2-year warranty, and Calgary-based service centre.
Compared to a conventional flash that uses four AA batteries, you'll see a huge improvement to both recycle times and shots per charge. We're talking a full power recycle of just 1.5 seconds, and 480 full power shots before you'll need to reach for your charger. Don't risk missing a shot!
The built-in 2.4GHz radio receiver offers full power control and triggering without the need for an attached receiver. Just a single radio transmitter is all you’ll need to have full control over all your V860iiN flash units. Use your flash on-camera, off-camera, or as a radio master!
The menu system has received an overhaul to be quicker and more intuitive. Particularly improved is the radio master interface, allowing you to easily control other Godox flashes and strobes from the V860iii's rear display.
A minor complaint with previous iterations of the V860 was its somewhat fiddly wheel-lock for its hot-shoe. The V860iii has a simplified button and lever style lock that will speed things up for you.
LED Modeling Light
A small but bright LED has been added to the front of the flash body, and can be used as a focusing aid or as a rough preview of where your bare flash will land.
TTL mode allows your Pentax camera to automatically set the power and zoom of the flash.
High Speed Sync allows you to shoot shutter speeds up to 1/8000s. Perfect for freezing action and giving you full control of the ambient light, even in the bright midday sun.
The huge 20-200mm zoom range allows the flash to push light as far or wide as you'd reasonably want to. Flip out the wide-angle diffuser, and your 20mm zoom will spread to 14mm.
Expanded Tilt Angles
The V860iii brings added flexibility to the tilt and swivel mechanisms. Swivel from 0 to 330 degrees horizontally, and tilt from -7 to 120 degrees vertically.
Dedicated TTL/Manual Switch
A small switch on the front of the flash-body can quickly switch you between TTL and Manual modes. When using the V860iii on camera, it provides a quick and tactile way to cycle between modes without entering internal menus.
60 (m at ISO 100 and maximum zoom)
LED Modelling Lamp
2W, 5300K+/- 200K
TTL, Manual, Multi
High Speed Sync (HSS)
Yes, up to 1/8000s (off-camera only)
Number of Flashes at Full Power
1/2000s to 1/300s
9 stops (1/256 to 1/1) in 1/3 or 1/10 increments
2.4 GHz radio (32 channels/5 groups), S1 and S2 optical slave modes
100 m / 328 ft
LCD dot-matrix panel
2.5mm sync port, USB-C port (for firmware updates only)
Rechargeable lithium battery (7.2V, 3000 mAh)
7.7" x 3.0" x 2.3" / 195 mm x 75 mm x 59 mm
1.2 lbs / 530g (with battery)
-1 x V860iiiP flash -1 x Mini Stand -1 x Protective Case -1 x Lithium Battery -1 x Charging Cable -1 x Battery Charger
Subscribe to Strobepro
Sign up to get the latest on sales, new releases and more …