





MA2
At a glance: Hot-shoe macro twin light · Dual flexible arms · A/B channel control · LED 2800–6500K · CRI ≈96 / TLCI ≈97 · Built-in 3300mAh battery · USB-C
The Godox MA2 Flexible Macro Twin Light is a hot-shoe LED macro light with two flexible arms, so you can light insects, flowers, mushrooms and small products from either side of the lens. Each side is controlled on its own (A/B), the LED runs from 2800K to 6500K, and a hot shoe at the end of each arm lets you add compact flashes for a twin-flash setup. A built-in battery and USB-C charging keep it ready for outdoor close-ups.
Bend each arm to place the light exactly where the subject needs it, including low-angle and forest-floor work. Hot shoe mounts at the end of each arm accept compact flash units. Godox rates each arm for a total load of no more than 90 g.
Turn the left and right light sources on or off and adjust them independently for single-sided or dual-sided fill. In FLASH mode, the MA2 supports S1/S2 photocell triggering for manual flash setups and TTL setups with pre-flash.
LED mode gives 0–100% brightness from 2800K to 6500K for macro video fill or focusing assistance. In FLASH mode, the LED modelling lamp uses the same 2800K to 6500K range, so you can preview the light before you shoot.
The included MA02-D diffuser attaches to the magnetic base and secures with snap fasteners. Fold it up or down, or gently shape the edges, to soften light and reduce harsh highlights on reflective or textured subjects.
The built-in 3.635V, 3300mAh lithium battery runs for about 3 h 20 min at 100% brightness and recharges over USB-C in about 2 h 40 min. The arms fold up and the diffuser detaches for packing.
| Model | Godox MA2 |
|---|---|
| Product type | Flexible macro twin light (hot-shoe mount) |
| FLASH mode | S1/S2 photocell triggering |
| LED modelling lamp CCT (FLASH mode) | 2800K to 6500K |
| LED mode brightness | 0–100% |
| LED mode CCT | 2800K to 6500K |
| CRI | ≈96 |
| TLCI | ≈97 |
| Illuminance (5600K, bare, 100%) | 6250 lux at 0.3 m · 2330 lux at 0.5 m · 559 lux at 1 m |
| Battery | Built-in lithium, 3.635V, 3300mAh, 11.9955Wh |
| USB-C input | 5V 3A |
| Charging time | Approx. 2 h 40 min |
| Runtime | Approx. 3 h 20 min at 100% brightness |
| Maximum load per arm | 90 g |
| Operating temperature | -10°C to 40°C |
| Dimensions | 410 × 57 × 52 mm (16.1 × 2.2 × 2.0 in), arms extended, without accessories |
| Weight | Approx. 340 g (12 oz), without accessories |
No. The MA2’s own light sources are LEDs. In FLASH mode, it works with compact flashes mounted on the arm hot shoes and supports S1/S2 photocell triggering, while the LED modelling lamp helps you preview the light.
Godox rates each flexible arm for a maximum total load of 90 g. Keep any flash plus accessories on one arm under that limit so the arm holds its position and isn’t strained.
Yes. The MA2 has A/B dual-channel control, so you can turn each side on or off and adjust it independently. That makes it easy to light from one side or fill both sides of a small subject.
Godox rates the built-in 3300mAh battery at about 3 hours 20 minutes at 100% brightness. It recharges over USB-C (5V 3A) in about 2 hours 40 minutes with the included cable.
Yes. LED mode gives continuous light from 0–100% at 2800K to 6500K with CRI ≈96 and TLCI ≈97, so you can use it as fill for close-up video or as a focusing aid.
Your MA2 includes our 2-Year In-House Warranty. We repair it here in Calgary when parts are in stock, or replace it if it can’t be repaired. After the warranty ends, we still service it at a nominal cost. See warranty details or request service.