Not sure which controller to get? The XPROII is the newest option and best choice for the majority of users. The large, upward-tilted display with dedicated buttons makes managing your flash groups easy. If you need a pass-through hotshoe, go for the X2T-S instead.
Strobepro is the largest distributor of Godox products in Canada. Give yourself peace of mind with Strobepro's helpful staff, 2-year warranty, and Calgary-based service centre with our industry-leading support.
Godox has been leading the wireless remote game for years now. It is simply the easiest and most reliable triggering system on the market. One controller works on all Godox X series lights. From your XPROII remote you'll be able to control speedlites, battery strobes and studio strobes quickly and easily. Just match the channel and group and you're good to go.
Easily switch between the different modes of your light. Choose Manual mode to be in full control, or choose TTL to let your camera take over. Enable multi-mode, disable flash groups, or shoot at up to 1/8000 s in HSS mode. This controller does it all!
*Please note not all Godox lights are TTL, Multi and HSS compatible.
With the addition of Bluetooth, the XPROII can now interface with the Godox Flash App. Connect the XPROII to your smartphone and get full control over your flashes directly from your phone. You can even use your phone as the camera and fire your lights (your mileage may vary depending on your exact model of smartphone).
Works with most Sony Cameras.
|Power supply||2*AA batteries|
|Flash Exposure Control|
|Stroboscopic flash (Multi)||Yes|
|Second- curtain sync||Yes (Set on camera)|
|Flash exposure compensation||±3EV(exposure value）, adjustable in 1/3 EV increment|
|Flash exposure lock||Yes|
|Modelling lamp flash||Control the modelling lamp flash by flash trigger|
|Beeper||Control the flash recycle beep ON/OFF|
The receiver end can control the camera shooting through the 2.5mm sync cord jack
|ZOOM setting||Adjust the ZOOM value by the transmitter from 24 to 200|
|TCM function||Transform the TTL shooting value into the output value in the M mode|
|Firmware upgrade||Upgrade through the Type-C USB port|
Settings will be stored 2 seconds after last operation and recover after a restart
|Display||Large LCD panel, backlighting ON or OFF|
|Transmission range (approx.)||0-100m|
|2.4G Wireless Frequency Range||2413.0MHz-2464.5MHz|
|Bluetooth Transmission Frequency||2402.00MHz -2480.00MHz|
|Max. Transmitting Power||5dbm|
-1 x Godox XPROII-S Radio Controller for Sony
Finally! The convenience of the XPRO with channel scanning capabilities of the XT remotes. Your likelihood of misfires are gone. Shot about 5k plus images so far, and I can count the times my flashes misfired. Worth the cost!
Excited to get the new version of this Godox flash transmitter. It works wonderfully and love the new hot shoe click to tighten vs the old screw to tighten. As always the customer service buying with StrobePro is outstanding and well beyond the competition.
I haven't used the item yet. But if I had, I would give it an appropriate review.
This works brilliantly to connect with the Sekonic L-858D (godox transmitter). Power adjustments are now available through the meter (at subject) or through the XPROll-N at the camera.
I shoot events (concerts / nightclubs) where I run up to 7 strobes at a time, and am loving the small conveniences of the version two. Among my favourite upgrades are the backlit buttons, double tapping the side group buttons to toggle groups on & off, the scan feature to find the channels with least interference, improved battery cover lock, and the simple hotshoe lock. Small quality of life improvements that make working with the XPro more enjoyable. There are tons of features I’ll never use, like Bluetooth and app connectivity, though for some people it may be handy. Loved my XPro V1 dearly, and this is an improvement in every area. Worth the cost of upgrading for my use case.