Strobepro Background Power Lifting Shaft Set

Power Up Your Backgrounds

If you're tired of manually pulling your backdrops up and down then the Strobepro Background Power Lifting Shaft Set is for you.  Everything you need comes in the kit to mount up to 3 backdrops with ease.  The brackets can be mounted on stands, or screwed to the wall or ceiling.

Please Note

We are improving the packaging of this product with our manufacturer.  The brackets are raw powder coated steel and may have scuffs from packaging.  Unfortunately the control box could also contain some minor blemishes due to rubbing during shipping.  This in no way affects the performance but we want you to be aware. 

Multiple Mounting Options

The Strobepro Background Power Lifting Shaft Set is portable.  All you need are 2 stands (10' Air Recommended) and you can install the system quickly.  If you want a permanent solution you can screw it into your wall or ceiling.

No More Unspooling

The most annoying thing dealing with paper rolls is preventing them from unspooling.  Constantly climbing a ladder to put a clamp on your paper is frustrating and time consuming.  With the lifting shaft motors, that headache is eliminated.  Each motor locks into position as soon as you stop unwinding it.

Save Your Paper

Mounting paper rolls horizontal can cause the cardboard cores to sag over time.  Prevent this by using the optional Strobepro Aluminum Background Cores. Just slide the aluminum core through your paper roll to reinforce it.  This set works best with paper rolls but you can also attach muslin backdrops to the optional Strobepro Aluminum Background Cores.

Multiple Width Paper

Paper comes in several sizes which can be an issue to use on a background  lifting system. Optional Strobepro Aluminum Background Cores allow you to use multiple different sized paper rolls at the same time.  Since the aluminum core width stays the same you can slide on 4.5', 7' or 9' Savage Paper rolls at the same time.

Just Plug it In

Each lifting shaft motor plugs into the main receiver.  Then just plug the receiver into any 110v outlet and you're good to go.

Specifications

Includes

3 x Lifting Shaft Sets
3 x Power Drive Motors
2 x Wall/Stand Brackets
1 x Power Receiver
1 x Wireless Remote Control