





ES01-K3
At a glance: 3-pack with connecting bracket · Three motorized cups · Load capacity ≤ 2.0 kg (4.4 lb) · 1/4" mount · Built-in battery, USB-C charging
The Godox ES01 K3 Motorized Suction Holder 3-Pack with Bracket joins three ES01 motorized suction cups on a 3-light connecting bracket, for loads up to 2.0 kg (4.4 lb) on smooth surfaces such as glass, tiles and car windows. Place the cups and press down: they attach automatically, and the release button on each cup lets it go. The cups can also be used one at a time, just like the single Godox ES01.
The K3 kit mounts three motorized cups on Godox’s 3-light connecting bracket, raising the load capacity to 2.0 kg (4.4 lb). Godox shows this setup with the Godox ML150RF LED light.
Press each silicone cup straight onto a smooth surface and it attaches automatically. Press the air release button on a cup to remove it.
Godox’s triple-use steps install the included 1/4" cold shoe mount as a 1/4" adapter on the connecting bracket, so lights with a 1/4" threaded hole can screw on. Each cup also has a cold shoe, so you can use the cups one at a time with a shoe-foot light such as the Godox iT32.
Each cup has a built-in 3.8V, 200mAh (0.76Wh) battery that charges over USB-C (5V 0.5A) in about one hour. The kit includes three USB-A to USB-C cables; a power adapter is sold separately. The indicator on each cup glows red while charging, green when full and flashes red when the battery is low. Godox notes that the USB-C ports should face outward when the cups are installed on the bracket, so they’re easy to reach for charging.
| Spec | Godox ES01 K3 | Godox ES01 |
|---|---|---|
| Pack | 3-pack with 3-light connecting bracket | Single cup |
| Load capacity | ≤ 2.0 kg (4.4 lb) | ≤ 0.6 kg (1.3 lb) |
| Mounting | 1/4" mount on the connecting bracket; cups can also be used one at a time | Cold shoe base and 1/4" cold shoe mount |
| Charging cables | 3 × USB-A to USB-C | 1 × USB-A to USB-C |
Pick the ES01 K3 if you want three cups and a connecting bracket for loads up to 2.0 kg. Pick the single Godox ES01 if you only need one cup for small lights up to 0.6 kg.
| Model | Godox ES01 K3 |
|---|---|
| Product type | Motorized suction holder 3-pack with connecting bracket |
| Load capacity | ≤ 2.0 kg (4.4 lb) with three cups on the connecting bracket |
| Mounting | 1/4" mount on the 3-light connecting bracket; each cup also has a cold shoe when used on its own |
| Surfaces | Smooth surfaces, such as glass, tiles and car windows |
| Battery (each cup) | Built-in lithium, 3.8V, 200mAh (0.76Wh) |
| Charging | USB-C, 5V 0.5A input; charging time approx. 1 hour per cup |
| Operating temperature | -10°C to 40°C |
| Dimensions (one cup) | 68 × 68 × 42 mm (2.7 × 2.7 × 1.7 in) |
| Weight (one cup) | Approx. 69 g (2.4 oz) |
Godox rates the ES01 K3, with three cups on the connecting bracket, for loads up to 2.0 kg (4.4 lb). Used one at a time, each cup is rated for loads up to 0.6 kg (1.3 lb). Keep within these limits.
The ES01 K3 includes three motorized suction cups, a 3-light connecting bracket, a 1/4" cold shoe mount, a hex wrench, three USB-A to USB-C charging cables and the instruction manual. The 1/4" mount is installed on the connecting bracket for triple-cup use.
Yes. Each cup is an ES01 motorized suction holder with its own cold shoe, so you can use them separately the same way as the single Godox ES01. Godox rates a single cup for loads up to 0.6 kg (1.3 lb).
Each cup charges over USB-C with the included cables and a 5V power adapter (sold separately). Charging takes about one hour. The indicator glows red while charging and green when full; flashing red means the battery is low.
Lights with a 1/4" threaded hole mount on the connecting bracket, and shoe-foot lights can attach to a cup’s cold shoe when that cup is used on its own. Godox shows the K3 with the Godox ML150RF. Stay within the 2.0 kg load limit.
Yes. Your ES01 K3 includes our 1-Year Strobepro Warranty, with support from our Calgary team. We handle claims in-house at our service centre. See warranty details or request service.