New
Godox AD200 Pro II TTL Battery Powered Wireless Strobe
$445.50 CAD$468.95 CAD
The Strobe, The Myth, The Legend
Too much? Well, it's no secret that everyone here at Strobepro is in love with the AD200 ecosystem! Godox continues its refresh of its strobe lineup by giving the the AD200 Pro II some colour coded group indicator lights, an extra stop of power on the low end, new and improved flash heads, and the all new "wireless sync" function (compatible with the X3 radio controller).
The Strobepro Difference
Strobepro is the largest distributor of Godox products in Canada. Give yourself peace of mind with Strobepro's helpful staff, 2-year warranty, and Calgary-based service centre.
10 Stop Power Range
From the respectable 200Ws at full power to incredibly fast low power pops at 1/512, the AD200 Pro II can handle everything from full body portraits to water droplet photography.
Radio Controlled with Quick Pairing
Like all current Godox strobes, this comes with a built-in radio receiver. All you need is any Godox X-series radio controller for remote power control up to 100 meters away. If you have an X3 Radio Controller, the A200 Pro II supports its Wireless Sync feature allowing you to instantly grab the channel and/or ID. Less time in menus = more time shooting!
Updated Flash Heads
Both the bare-bulb and fresnel heads offer LED strips around the outside, providing you with usable modelling lamps for studio work. The Fresnel Head gets some improved ventilation, expanding the strobes thermal limits when firing consecutive high powered flashes.
Upgraded Display
This strobe boasts a brand new high contrast TFT colour display that is easily readable in any lighting conditions. And, to speak plainly, it just looks classy!
Group Colour Indicators
An LED indicator on the rear section of the AD200 Pro II assigns a colour to each group, giving the user a quick visual of which strobes are separate and which are working in tandem.
Compact and Capable
The AD200 Pro II continues the work of its predecessors as the best option around if you are looking for portability! Its form factor is close to that of a typical speedlite, but it carries roughly three times the available power.
The AD200 Ecosystem
This strobe supports a growing number of small proprietary modifiers, flash heads, gels, etc. Want to mount at 60" Octabox on it instead? No problem. Just pick up an S2 Bracket to use any Bowens-compatible modifier. The AD200 Pro II is the Swiss Army Knife of strobes. Note: Some retailers falsely listed the AD-B2 Double Bracket as incompatible. We tested it. It works!
TTL Ready
The AD200 Pro II supports TTL (automatic flash power) which makes it a great choice for any dynamic environment like a wedding or sporting event.
HSS
The AD200 Pro II supports HSS, allowing you to unlock your whole shutter speed range where you'd otherwise be limited to your flash sync speed. This is typically used to bring down ambient light when shooting with fast apertures, but it can also be used to freeze fast action in competing light.
Specifications
| Maximum Watt-Seconds | 200 |
| Guide Number | 60m (bare bulb with standard reflector) / 52m (fresnel head) |
| Flash Modes | TTL, Manual, Multi |
| High Speed Sync (HSS) |
Yes, up to 1/8000s |
| Recycle Time | 0.01–1.8s |
| Number of Flashes at Full Power | 500 |
| Flash Duration | 1/220-1/13150s (bare bulb) / 1/220-1/15380s (fresnel head) |
| Output Power | 10 stops (1/512 to 1/1) in 1/3 or 1/10 increments |
| Exposure Compensation | ±3 stops in 1/3 increments |
| Colour Temperature | 5600K (±200K) / 5600K (±100K) in colour stability mode |
| Wireless Modes | 2.4 GHz radio (32 channels/5 groups/99 IDs), S1 and S2 optical slave modes |
| Radio Range | 100 m / 328 ft |
| Display | Colour TFT Display |
| Modelling Light | 6W/5W LED Arrays (Bare Bulb/Fresnel Head) |
| Ports | 3.5mm sync, USB-C port (for firmware updates only) |
| Accessory Mount Type | Proprietary (S1 or S2 Bracket recommended) |
| Fan Cooled | Yes |
| Power Source | 1 x rechargeable lithium-ion battery (14.4V, 2900mAh) OR Godox PB960 Power Pack |
| Battery Indicator | On strobe display |
| Dimensions (with fresnel head) | 21.1cm x 7.9cm x 5.3cm / 8.3" x 3.1" 2.1" |
| Weight (with battery and fresnel head) | 892g / 2.0 lbs |
Includes
-1 x AD200 Pro II Body
-1 x Bare Bulb Flash Head
-1 x FTAD200 Flash Tube
-1 x Fresnel Head
-1 x Mounting Bracket with Umbrella Holder
-1 x Battery
-1 x Charging Block
-1 x USB-C Cable
-1 x Carrying Case
011900