FT-AD400ProII
At a glance: Replacement flash tube · For the Godox AD400 Pro II · Plug-in tube
The Godox FT-AD400ProII is the replacement flash tube for the Godox AD400 Pro II. Keep a spare in your kit for location work, or replace a damaged or worn tube. The tube plugs straight into the tube socket.
Power off the flash, remove the reflector or other accessory, grasp the old tube and pull it straight out. Insert the new tube into the tube socket until it’s fully seated.
Godox recommends powering off and letting the flash cool for 10 minutes before replacing the flash tube. Don’t touch the tube when it’s hot.
| Model | Godox FT-AD400ProII |
|---|---|
| Type | Replacement flash tube |
| Compatible with | Godox AD400 Pro II |
The FT-AD400ProII is the replacement flash tube for the Godox AD400 Pro II. For the original AD400 Pro, choose the FT-AD400PRO.
Power off the AD400 Pro II and let it cool for 10 minutes. Remove the reflector, pull the old tube straight out and push the new tube into the socket until it’s fully seated.
No. Flash tubes and bulbs are consumable parts and aren’t covered by warranty. See warranty details.
Replace it if the tube is cracked, damaged or thermally deformed. Godox says to stop using the flash right away if the tube is damaged.
No. The FT-AD400ProII is the flash tube only. Keep using the reflector and accessories you already have with your AD400 Pro II.