Godox's QT Series of strobes is about zero compromise. The third generation brings a new body design, an LED modelling lamp, dramatically quicker recycle times, and an increased power range (down to 1/256),
Strobepro is the largest distributor of Godox products in Canada. Give yourself peace of mind with Strobepro's helpful staff, 2-year warranty, and Calgary-based service centre.
The QT400iiiM provides 400 W*s of power at the high end, which is more than enough for a key light in a typical studio. If you're after that extra bit of power, or faster recycle times at equivalent powers, check out the QT600iiiM or the ultra-powerful QT1200iiiM.
Godox's third-gen QT-Series strobes can recycle their full power in just 0.9 seconds. At mid-range powers, you will easily keep up with long bursts in continuous high.
Not to be confused with HSS (we'll get to that in a moment), the QT-Series strobes come equipped with a special mode that allows the user to access t0.1 flash durations faster than 1/20,000s. Freezing motion has never been easier.
The QT-series lights support HSS—a unique feature for a plugin strobe. Now your whole shutter speed range is at your disposal, allowing you to bring down ambient light with ease.
It's standard fare now, but still worth mentioning. No external receiver is required. Just pick up a compatible Godox X-Series controller and you'll have everything you need to trigger and control your QT strobe right from your camera.
With a 9-stop power range, gone are the days where you need strobes of various powers in different roles. Even the mighty QT1200iiiM is capable of a very low-power pop.
|Guide Number||65 (m at ISO 100 with 7" 55-degree reflector)|
|Flash Modes||Manual, High Speed Mode (for faster flash durations)|
|High Speed Sync (HSS)||Yes, up to 1/8000s
|Flash Duration (High Speed Mode)||1/670s to 1/29,600s|
|Output Power||9 stops (1/256 to 1/1) in 1/3 or 1/10 increments|
|Wireless Mode||2.4 GHz radio (32 channels/5 groups), S1 and S2 optical slave modes|
|Radio Range||100 m / 328 ft|
|Display||LCD dot-matrix panel|
|Modelling Light||40W LED (controllable from 1-100%)|
|Ports||Sync Port, USB-A (for legacy antennas)|
|Accessory Mount Type||Bowens|
|Power Source||Plugin, 110 VAC|
|Circuit Protection||5A fuse|
|Dimensions||392mm x 176mm x 143mm / 15.4" x 6.9" x 5.6"|
|Weight||6.6 lbs / 3.0 kg|
-1 x QT400iiiM HSS Studio Strobe
-1 x Protective Cap
-1 x Glass Cover
-1 x Flash Tube
-1 x Power Cord
OPTIONAL (Select from dropdown)
-1 x Godox XPro or X2T radio controller
Fabulous light! I love it’s ability to increase and decrease power in 1/10 stops. It’s a very powerful light, but it also has the ability to go down to 1/256 which is great for newborns. And I also love how cool it stays. Very impressed!