Your Cart is Empty
LIMITED TIME - Free Shipping Orders over $99* CAD
The X2T-N TTL Wireless Radio Transmitter is the updated version to our popular Strobepro/Godox XT controller. We've taken everything you loved from that controller and made it better. This controller is fully compatible with all Strobepro and Godox lights.
Strobepro is the largest distributor of Godox products in Canada. Give yourself peace of mind with Strobepro's helpful staff, 2 year warranty, and Calgary based service centre with our industry leading support.
You now have dedicated buttons for each of the 5 groups on the top of the controller, making it super easy to access and see all your fast.
We've moved the dial down to the bottom left. Now you can keep one hand on the camera grip and use your left to adjust the dial.
Gone is the turn dial and replaced with a simple lever lock. No more need for tiny fingers!
Download the Godox Photo App and have full control directly from your cell phone. Plus take pictures with your cell phone and have all your Strobepro & Godox lights under your smartphone control.
THe LCD is not only bigger, its brighter and a lot easier to use thanks to its menu redesign. Find common functions easily at the push of a button.
That's right now you can adjust your compatible strobes down to 1/256 in 1/10th increments for the most precise control.
You’ll have ETTL automatic or manual control if you prefer, all with full HSS at up to 1/8000s shutter speeds.
The Strobero X2T-N transmitter paired with the XRN receiver gets all your Nikon flashes off camera. Better yet, add any Strobepro speedlites or strobes and the receiver is built in already.
Don’t get stuck in low light. The dedicated focus assist beam switch allows you to quickly project a grid assist pattern if needed.
Add full control in up to 5 separate groups.
You’ll never have interference again with 32 channels. Plus you now have the ability to auto seek the best channel.
328 foot range. If you find yourself in need of firing your flash a few blocks away, we’ve got you covered.
USB-C Port for Firmware Upgrades
X2T-C for Canon cameras
X2T-N for Nikon cameras,
X2T- for Fujifilm cameras
X2T-S for Sony cameras
X2T-F for Fujifilm cameras
X2T-O for Olympus & Panasonic cameras
X2T-P for Pentax cameras
| Model | X2T-C | X2T-N | X2T-S | X2T-F | X2T-O | X2T-P |
|---|---|---|---|---|---|---|
| Compatible cameras Works with cameras with PC sync socket |
Canon EOS cameras (E-TTL II autoflash) |
Nikon cameras (i-TTL autoflash) |
Sony cameras (TTL autoflash) |
Fujifilm cameras (autoflash) |
Olympus/Panasonic cameras (TTL autoflash) |
Pentax cameras (TTL autoflash) |
| Compatible mobile phones | iPhone, HUAWEI, Samsung (Please refer to the compatibility list on the manual to learn more about the compatible models) |
|---|---|
| Power supply | 2x AA batteries |
Flash Exposure Control |
|
| TTL Autoflash | E-TTL II (Canon) i-TTL (Nikon) TTL (Sony, Fujifilm, Olympus/Panasonic, Pentax) |
| Manual Mode | Yes |
| Multiflash Mode | Yes |
Functions |
|
| High-Speed Sync | Yes |
| Rear-Curtain Sync | Yes |
| Flash Exposure Compensation | Yes, ± stops in 1/3 stop increments |
| Flash Exposure Lock | Yes |
| Focus Assist | Yes |
| Modeling Lamp | Yes |
| Beeper | Yes |
| Wireless shutter Release | The receiver can control the camera shooting via 3.5mm sync cord jack |
| Zoom Setting | Adjust the focal length of the flash through the transmitter |
| Firmware Upgrade | Support program firmware upgrade via Type-C USB cable |
| Memory Function | As long as 2 seconds after setting parameters, the parameters will be remembered, and the original data will be recovered once restarted. |
Wireless Flash |
|
| Transmission Range | 0-100m |
| Built-In Wireless System | 2.4G Wireless Transmission |
| Modulation Mode | MSK |
| Channels | 32 |
| Wireless ID | 01-99 |
| Groups | 5 |
| Display | Large LCD panel, backlighting ON or OFF |
Physical Specs |
|
| Dimensions | 72 x 70 x 58 mm (2.8 x 2.75 x 2.3") |
| Weight | 90 g (3.17 oz.) |
1 X X2T-N Transmitter
Collections: AU ARTS Recommended Products, Radio Triggers
It's pretty easy to understand and to control! Can't wait to get going on this!
The X2T trigger arrived with a bunch of other gear that I ordered. The first thing that I did was check out the new foot locking mechanism. Twisted it on - couldn't twist it off. I stopped short of using enough force to break it. Contacted Kevin and told him the problem. You cannot beat Strobepro's service. Kevin set me another one by Express Purolator, probably even before he had received the original one which I had returned. It was with great anticipation that I twisted the foot lock on the second unit. It was stiffer to turn to lock than the first one and appeared to not want to unlock like the first one. I guess I held my nose the right way, because I eventually got it to unlock. Note - it does NOT unlock with a delicate push of an index finger the way you see it done in the video. Maybe it will loosen up over time. The X2T connected to my LG G7 via bluetooth with no problem. I'm looking forward to controlling my two V860IIs, my two AD200s and my XPro 600 all via the phone app.
Hi Jim, It sounds like your hotshoe could be bent which is causing the issue. You should be able to easily move the lock just like the video. We'll contact you by email to figure out what is going on. Thanks
this product was very easy to use. Although i had some issues connecting it to my Nikon Speedlight with my Receiver and i called Strobepro and i got the best customer service.
Easy to use, no problems at all.
Although missing the TCM function like the XT Pro, this model lets me use my Pocket Wizard radios with my legacy strobe gear by simply mounting a PW MiniTT1 on the X2T hot shoe. I like that this model also lets you see the LCD screen from the back when the camera is mounted high on a tripod or shooting straight down. It has been reliable and no sync issues.
