Godox XTR16 Radio Receiver

After some trouble figuring it out, it works great on my Bolt VB-22 (AD360 first edition, rebranded by the big New York camera store). This is not the same as the AD360v2 / Strobepro X360(C|N) - those have built in receivers and do not require an external one.

To set channel from 1-16: Take the channel your XPro is set to and subtract 1. Convert to binary, set dip switches right to left (1 is the least significant digit).

To set group: Set "power" dial to A,B,C,D, or E same the group on your XPro. It should probably also work if your xpro is in 16 group mode - I haven't tried it as circumstances where more than 5 groups would be manageable seem rare.

XPro Channel - dip setting
1 - 0000
2 - 1000
3 - 0100
4 - 1100
5 - 0010
6 - 1010
7 - 0110
8 - 1110
9 - 0001
10 - 1001
11 - 0101
12 - 1101
13 - 0011
14 - 1011
15 - 0111
16 - 1111

After some trouble figuring it out, it works great on my Bolt VB-22 (AD360 first edition, rebranded by the big New York camera store). This is not the same as the AD360v2 / Strobepro X360(C|N) - those have built in receivers and do not require an external one.

To set channel from 1-16: Take the channel your XPro is set to and subtract 1. Convert to binary, set dip switches right to left (1 is the least significant digit).

To set group: Set "power" dial to A,B,C,D, or E same the group on your XPro. It should probably also work if your xpro is in 16 group mode - I haven't tried it as circumstances where more than 5 groups would be manageable seem rare.

XPro Channel - dip setting
1 - 0000
2 - 1000
3 - 0100
4 - 1100
5 - 0010
6 - 1010
7 - 0110
8 - 1110
9 - 0001
10 - 1001
11 - 0101
12 - 1101
13 - 0011
14 - 1011
15 - 0111
16 - 1111

Such a great receiver works very well... was super impressed by Range and never missed a shot

Such a great receiver works very well... was super impressed by Range and never missed a shot

Trent, thank you for posting the binary settings relative to the XPro. I used them for setting my old XRM receiver and it works great. I don't have to use the SLAVE setting any more. I still have to set the strobe unit manually, but at least I can trigger it from my common XPro transmitter.

Jack